Pulley Block Assembly | Life Fitness 8225 specs

PULLEY
BLOCK
ASSEMBLY
	5
	28	27
	28
	25
	13
		11
FIGURE 16	22 3/8 X 2-3/4”
FIGURE 16

STEP 16:

•Route the threaded end of the ARM CURL CABLE (11) through the UPRIGHT (5) as shown, then SE- CURELY assemble one 4-1/2”PULLEY (13) to the UPRIGHT (4) and over the top of the cable using two 3/8 X 2-3/4” BOLTS (22), two 3/8” FLANGE SPACERS (28), two 3/8” WASHERS (25), and two 3/8” LOCKNUTS (27). (NOTE: The LOW ROW CABLE (11) should be routed over the retaining bolt as shown in FIGURE 16.)

•Route threaded end of the ARM CURL CABLE (11) around the bottom pulley of the PULLEY BLOCK

ASSEMBLY as shown in FIGURE 16.