Life Fitness 8225 manual Sure the cable runs in the groove of the Pulley

FIGURE 13

12

2

7

PULLEY

BLOCK

ASSEMBLY

STEP 13:

•Route threaded end of the TRICEP CABLE (12) around pulleys in TOP BOOM (2) and PULLEY BLOCK ASSEMBLY. Route TRICEP CABLE (12) down through hole in TOWER BRACE (7) as shown in FIGURE 13.

FIGURE 14

27

2

3/8 X 2-1/4” 21

13

12

STEP 14:

•SECURELY assemble one 4-1/2” PULLEY (13) between the plates of the TOP BOOM (2) using one 3/8 X 2-1/4” BOLT (21) and one 3/8” LOCK NUT (27) as shown in FIGURE 14. (NOTE: Make

sure the cable runs in the groove of the PULLEY.)

11