Life Fitness 8225 manual Step

Page 10

26

24

3

18 1/2 X 4”

4

31

15

FIGURE 11

STEP 11:

Place TOWER BRACE (4) over the GUIDE RODS (15) as shown and SECURELY assemble TOWER BRACE (4) to the TOWER (3) using two 1/2 X 4” BOLTS (18), two 1/2”WASHERS (24), and two 1/2” LOCK NUTS (26) as shown in FIGURE 11.

Slide the 13/16”SHAFT COLLARS (31) to the top of the GUIDE RODS (15) and SECURELY tighten the SHAFT COLLAR (31) set screws. See FIGURE 11.

27

STEP 12:

13

LOOSELY assemble two 2 X 7-1/4” PLATES (8) to

8

two 4-1/2” PULLEYS (13) using two 3/8 X 2-1/4”

25

BOLTS (21), four 3/8” WASHERS (25), and two 3/8”

3/8 X 2-1/4” 21

LOCK NUTS (27). See FIGURE 12.

 

FIGURE 12

1/2

1/2

1/2

1/2

1/2

1/2

0

1

2

3

4

5

6

10

Image 10
Contents BICEP/TRICEP Machine Bolt Length Ruler Parts List Step URE X 4 X 1-1/4 Long Side PAD Head Plate 33 should be on top Step Sure the cable runs in the groove of the Pulley Step Pulley Block Assembly Step Button Head Step