Life Fitness 8225 manual Bolt Length Ruler

Page 2

IMPORTANT

Please note:

*Thank you for purchasing the LIFE FITNESS 8225 BICEP/TRICEP MACHINE. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.

*We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your LIFE FITNESS customer service representa- tive at (800) 328-9714.

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please follow these rules:

1.Inspect equipment daily. Tighten all loose connections and replace worn parts immediately. Failure to do so may result in serious injury.

2.Do not allow minors or children to play on or around this equipment.

3.Exercise with care to avoid injury.

4.If unsure of proper use of equipment, call your local LIFE FITNESS STRENGTH distributor or call the LIFE FITNESS STRENGTH customer service department at (800) 328-9714.

5.Consult your physician before beginning any exercise program.

Tools Required for Assembly

*Rubber mallet or hammer

*3/4” wrench, 9/16” wrench

*Ratchet with 3/4” and 9/16” sockets

*5/32”, 7/32” Allen wrenches

*Adjustable wrench

*Tape measure

Bolt Length Ruler

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

BOLT LENGTH

BOLT LENGTH RULER:

1/2

1/2

1/2

1/2

1/2

1/2

0

1

2

3

4

5

6

2

Image 2
Contents BICEP/TRICEP Machine Bolt Length Ruler Parts List Step URE X 4 X 1-1/4 Long Side PAD Head Plate 33 should be on top Step Sure the cable runs in the groove of the Pulley Step Pulley Block Assembly Step Button Head Step