Assembly
FIGURE 5
Step 1:
Connect Cables as shown. Note: Be careful not to pinch wires. Excess wire should be pushed back into Main Upright.
Step 2:
Attach Console (5) to Main Upright using four Screws (59).
Note: The four Screws(59) will already be installed into the back of Console (5) when you remove it from the box.
Step 3:
Attach Reading Rack by inserting into holes located on the console.
Step 4:
Remove protective over-
lay screen from the console screen.
FIGURE 6
Step 1:
Attach Left Handlebar (3) using Spacer (19), Washer (61), Washer (68), Cap (21), Nut (52) and Cap (22).
Step 2:
Repeat for Right Handlebar
(4).
Figure 5 |
Figure 6 |
8 |