Image 831.159700 user manual Tighten all of the Nylon Locknuts used in steps 1 to

Page 10

12.Place the Right Safety Spotter (23) on the right Base

(7) and center it over the indicated hole. Note: The handle must point toward the center of the bench.

Have a second person hold the Locking Bar (34) so that the Right Weight Glider (31) rests on top of the Right Safety Spotter (23). Insert a Weight Guide (18) into the Right Weight Glider, the Right Safety Spotter, and the hole in the Base (7). Note: It may be neces- sary to tilt the Weight Guide away from the Upright (1) as you insert it.

Attach the Weight Guide (18) to the Base (7) with an M8 x 60mm Bolt (39), two M8 Washers (52), and an M8 Nylon Locknut (54). Do not tighten the Nylon

Locknut yet.

13.Note: If you are not planning to use Olympic weights with the weight bench, you do not need to perform this step. Keep the two Weight Adapters (33) in a safe place in case you need them in the future.

Fully engage the indicated hook on both sides of the weight bench before beginning this step.

Insert a 50mm Bushing (47) into the end of a Weight Adapter (33). With a second person holding the Barbell (35) so that it cannot turn, use the allen wrench to secure the Weight Adapter to the Barbell with a Large Washer (44) and an M10 x 25mm Bolt

(43).Note: The Large Washer must fit into the indentation in the 50mm Bushing (47) in the Weight Adapter.

Pull the remaining length of the Barbell (35) in the direction shown. Next, tighten the M8 x 16mm Screws used in steps 9 and 10. Attach the other Weight Adapter (33) to the other end of the Barbell

(35)in the same manner.

14.Attach the upper end of one of the Weight Guides (18) to the bracket on the Upright (1) with an M8 x 30mm Bolt (38) and an M8 Washer (52).

Attach the other Weight Guide (18) to the other Upright (1) in the same manner.

Tighten all of the Nylon Locknuts used in steps 1 to 14.

12

 

 

18

 

 

31

1

 

 

 

 

34

39

23

Handle

 

52

 

7

 

Hole

 

 

 

 

54

13

 

 

Hook

35

33

47

44

43

14

38

52

18

1

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important Precautions Right Side Before You BeginLeft Side Part Identification Chart-Model No .159700 R1299A Some small parts may be pre-assembled AssemblyDo not tighten the Nylon Locknuts yet Nylon Locknuts yet Bolt. Do not tighten the Nylon Locknuts yet En the Nylon Locknuts yetGuide away from the Upright 1 as you insert it Locknut yetTighten all of the Nylon Locknuts used in steps 1 to Nylon Locknut Nylon Locknut the Seat Adjustment Bracket must pivot easily Locknut the Seat Support Tube must pivot easilyPage Adjusting the Weight Bench Using the Locking BAR and Safety SpottersAdjusting the Backrest Part List-Model No Qty DescriptionExploded Drawing-Model No Full 90 Day Warranty Ordering Replacement PartsModel No

831.159700 specifications

Image 831.159700 is an innovative visual representation that captures the essence of modern design and technology, blending functionality with aesthetics. At first glance, this image showcases a harmonious composition of colors, shapes, and textures that draw the viewer’s attention.

One of the primary features of Image 831.159700 is its vibrant color palette. The use of bold, eye-catching colors creates a dynamic visual experience, while softer hues provide balance, allowing the image to convey a sense of calm amidst the vibrant backdrop. The interplay of colors serves not only to attract but also to guide the viewer’s eye through the composition, highlighting key elements within the image.

In terms of technology, Image 831.159700 exemplifies the use of advanced graphic design tools and techniques. High-resolution rendering techniques ensure that the details are crisp and clear, providing depth to the visual. The image likely utilizes vector graphics, allowing for scalability without any loss of quality, making it suitable for various applications, from digital displays to print media.

The characteristics of Image 831.159700 extend beyond aesthetics. It incorporates sophisticated layering techniques that add complexity and richness to the visual narrative. This multidimensional aspect invites viewers to explore the image in-depth, revealing new details upon closer inspection. The thoughtful composition demonstrates an understanding of balance and harmony, employing principles of design that resonate with both contemporary and traditional art forms.

Furthermore, Image 831.159700 may also leverage digital storytelling elements, integrating symbols and motifs that resonate with its audience. By doing so, the image not only serves as a visual treat but also communicates deeper meanings and messages, engaging viewers on an emotional level.

In summary, Image 831.159700 stands out for its vibrant color palette, high-resolution quality, and sophisticated design techniques. It embodies the fusion of aesthetics and technology, making it a significant piece in the realm of modern visual arts. Whether it is used in digital marketing, branding, or artistic expression, this image holds the potential to inspire and delight, making it a testament to the capabilities of contemporary design.
Top Page Image Contents