Image 831.159700 user manual Assembly, Some small parts may be pre-assembled

Page 6

Assembly

Before beginning assembly, carefully read the following information and instructions:

Make Things Easier for Yourself!

This manual is designed to ensure that the weight bench can be assembled successfully by anyone. By setting aside plenty of time, and by deciding to make the task enjoyable, assem- bly will go smoothly.

•Assembly requires two people.

•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

•Tighten all parts as you assemble them, unless instructed to do otherwise.

•For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. Note:

Some small parts may be pre-assembled.

•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.

In addition to the included allen wrench , assembly requires the following tools (not included):

• Two (2) adjustable wrenches

• One (1) rubber mallet

• One (1) standard screwdriver

• One (1) phillips screwdriver

•Lubricant, such as grease or petroleum jelly, and soapy water.

Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches or a set of ratchet wrenches.

1.Before beginning, make sure that you understand the information in the box above. Note: Some parts described in the assembly steps may be pre-assembled.

Press a 50mm Square Outer Cap (17) onto each end of a Base (7). Turn the Base so the large hole is in the position shown. Insert two M8 x 65mm Carriage Bolts (59) and two M10 x 65mm Carriage Bolts (40) up into the indicated holes in the Base. Place the Base flat on the floor.

Turn the Base Crossbar (20) so the warning decal is positioned as shown. Attach the Base (7) to the Base Crossbar with two M8 x 70mm Bolts (41), a Large Support Plate (12), and two M8 Nylon Locknuts (54).

Do not tighten the Nylon Locknuts yet.

2.Press a 50mm Square Outer Cap (17) onto each end of the other Base (7). Turn the Base so the large hole is in the position shown. Insert two M8 x 65mm Carriage Bolts (59) and two M10 x 65mm Carriage Bolts (40) up into the indicated holes in the Base. Place the Base flat on the floor.

Attach the Base (7) to the Base Crossbar (20) with two M8 x 70mm Bolts (41), a Large Support Plate (12), and two M8 Nylon Locknuts (54). Do not tighten the Nylon Locknuts yet.

1

Decal

54

 

 

17

 

 

 

 

 

 

20

 

 

 

54

 

12

 

 

 

 

Large Hole

 

 

17

7

59

41

 

 

40

 

 

2

 

12

17

 

41

 

 

 

 

 

 

 

 

54

Large Hole

17

7

59

54

 

 

20

40

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important Precautions Before You Begin Right SideLeft Side Part Identification Chart-Model No .159700 R1299A Assembly Some small parts may be pre-assembledDo not tighten the Nylon Locknuts yet Nylon Locknuts yet Bolt. Do not tighten the Nylon Locknuts yet En the Nylon Locknuts yetGuide away from the Upright 1 as you insert it Locknut yetTighten all of the Nylon Locknuts used in steps 1 to Nylon Locknut Nylon Locknut the Seat Adjustment Bracket must pivot easily Locknut the Seat Support Tube must pivot easilyPage Adjusting the Weight Bench Using the Locking BAR and Safety SpottersAdjusting the Backrest Part List-Model No Qty DescriptionExploded Drawing-Model No Ordering Replacement Parts Full 90 Day WarrantyModel No

831.159700 specifications

Image 831.159700 is an innovative visual representation that captures the essence of modern design and technology, blending functionality with aesthetics. At first glance, this image showcases a harmonious composition of colors, shapes, and textures that draw the viewer’s attention.

One of the primary features of Image 831.159700 is its vibrant color palette. The use of bold, eye-catching colors creates a dynamic visual experience, while softer hues provide balance, allowing the image to convey a sense of calm amidst the vibrant backdrop. The interplay of colors serves not only to attract but also to guide the viewer’s eye through the composition, highlighting key elements within the image.

In terms of technology, Image 831.159700 exemplifies the use of advanced graphic design tools and techniques. High-resolution rendering techniques ensure that the details are crisp and clear, providing depth to the visual. The image likely utilizes vector graphics, allowing for scalability without any loss of quality, making it suitable for various applications, from digital displays to print media.

The characteristics of Image 831.159700 extend beyond aesthetics. It incorporates sophisticated layering techniques that add complexity and richness to the visual narrative. This multidimensional aspect invites viewers to explore the image in-depth, revealing new details upon closer inspection. The thoughtful composition demonstrates an understanding of balance and harmony, employing principles of design that resonate with both contemporary and traditional art forms.

Furthermore, Image 831.159700 may also leverage digital storytelling elements, integrating symbols and motifs that resonate with its audience. By doing so, the image not only serves as a visual treat but also communicates deeper meanings and messages, engaging viewers on an emotional level.

In summary, Image 831.159700 stands out for its vibrant color palette, high-resolution quality, and sophisticated design techniques. It embodies the fusion of aesthetics and technology, making it a significant piece in the realm of modern visual arts. Whether it is used in digital marketing, branding, or artistic expression, this image holds the potential to inspire and delight, making it a testament to the capabilities of contemporary design.
Top Page Image Contents