Image 831.159700 user manual Guide away from the Upright 1 as you insert it, Locknut yet

Page 9

8.Press a 25mm Bushing (48) into each end of the Locking Bar (34).

Insert the Barbell (35) through the Locking Bar (34) until the Barbell is centered in the Locking Bar.

8

48

34

35 48

9.Identify the Left Weight Glider (32) by looking at the position of the round tube.

Press a 38mm Bushing (29) into each end of the round tube on the Left Weight Glider (32).

Slide the Left Weight Glider (32) onto the left end of the Barbell (35). Secure the Weight Glider to the Barbell with a hand-tightened M8 x 16mm Screw (50).

Look at the drawing on page 4 to make sure that you have correctly identified the left end. The Left Weight Glider must be turned as shown in the drawing.

10.Identify the Right Weight Glider (31) by looking at the position of the round tube.

Press a 38mm Bushing (29) into each end of the welded tube on the Right Weight Glider (31).

Slide the Right Weight Glider (31) onto the right end of the Barbell (35). Secure the Weight Glider to the Barbell with a hand-tightened M8 x 16mm Screw (50).

Make sure that the Weight Glider is turned as shown in the drawing.

11.Identify the Left Safety Spotter (24) by the position of the handle and the Left Spotter Hook (62). Place the Left Safety Spotter on the left Base (7) so it is cen- tered over the indicated hole.

Have a second person hold the Locking Bar (34) so that the Left Weight Glider (32) rests on top of the Left Safety Spotter (24). Insert a Weight Guide (18) into the Left Weight Glider, the Left Safety Spotter, and the hole in the Base (7). Note: Tilt the Weight

Guide away from the Upright (1) as you insert it.

Attach the Weight Guide (18) to the Base (7) with an M8 x 60mm Bolt (39), two M8 Washers (52), and an M8 Nylon Locknut (54). Do not tighten the Nylon

Locknut yet.

9

29 32

35

50

29

Round tube

10

 

 

29

 

50

 

 

 

 

29

Round

31

35

tube

 

11

18

 

 

 

1

34

 

 

 

32

 

Handle

 

 

 

24

62

 

7

54

 

 

 

52

 

Hole

 

39

 

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Model No Serial NoTable of Contents Important Precautions Before You Begin Right SideLeft Side Part Identification Chart-Model No .159700 R1299A Assembly Some small parts may be pre-assembledDo not tighten the Nylon Locknuts yet Nylon Locknuts yet En the Nylon Locknuts yet Bolt. Do not tighten the Nylon Locknuts yetLocknut yet Guide away from the Upright 1 as you insert itTighten all of the Nylon Locknuts used in steps 1 to Nylon Locknut Locknut the Seat Support Tube must pivot easily Nylon Locknut the Seat Adjustment Bracket must pivot easilyPage Using the Locking BAR and Safety Spotters Adjusting the Weight BenchAdjusting the Backrest Qty Description Part List-Model NoExploded Drawing-Model No Ordering Replacement Parts Full 90 Day WarrantyModel No

831.159700 specifications

Image 831.159700 is an innovative visual representation that captures the essence of modern design and technology, blending functionality with aesthetics. At first glance, this image showcases a harmonious composition of colors, shapes, and textures that draw the viewer’s attention.

One of the primary features of Image 831.159700 is its vibrant color palette. The use of bold, eye-catching colors creates a dynamic visual experience, while softer hues provide balance, allowing the image to convey a sense of calm amidst the vibrant backdrop. The interplay of colors serves not only to attract but also to guide the viewer’s eye through the composition, highlighting key elements within the image.

In terms of technology, Image 831.159700 exemplifies the use of advanced graphic design tools and techniques. High-resolution rendering techniques ensure that the details are crisp and clear, providing depth to the visual. The image likely utilizes vector graphics, allowing for scalability without any loss of quality, making it suitable for various applications, from digital displays to print media.

The characteristics of Image 831.159700 extend beyond aesthetics. It incorporates sophisticated layering techniques that add complexity and richness to the visual narrative. This multidimensional aspect invites viewers to explore the image in-depth, revealing new details upon closer inspection. The thoughtful composition demonstrates an understanding of balance and harmony, employing principles of design that resonate with both contemporary and traditional art forms.

Furthermore, Image 831.159700 may also leverage digital storytelling elements, integrating symbols and motifs that resonate with its audience. By doing so, the image not only serves as a visual treat but also communicates deeper meanings and messages, engaging viewers on an emotional level.

In summary, Image 831.159700 stands out for its vibrant color palette, high-resolution quality, and sophisticated design techniques. It embodies the fusion of aesthetics and technology, making it a significant piece in the realm of modern visual arts. Whether it is used in digital marketing, branding, or artistic expression, this image holds the potential to inspire and delight, making it a testament to the capabilities of contemporary design.
Top Page Image Contents