Image 831.159700 user manual Nylon Locknut

Page 11

15.Press a 50mm Square Outer Cap (17) onto each end of the Small Stabilizer (25).

Attach the Small Stabilizer (25) to the Bench Frame

(5) with two M10 x 65mm Carriage Bolts (40) and two M10 Nylon Locknuts (11). Note: There is an indenta- tion around the holes on one side of the Small Stabilizer. This side must be facing the floor.

16.Press a 50mm x 70mm Outer Cap (10) onto each end of the Large Stabilizer (26).

Turn the Large Stabilizer (26) so the warning decal is in the position shown. Attach the Large Stabilizer to the Bench Frame (5) with two M10 x 65mm Carriage Bolts (40) and two M10 Nylon Locknuts (11). Note:

There is an indentation around the holes on one side of the Large Stabilizer. This side must be fac- ing the floor.

17.Press two 20mm x 40mm Inner Caps (28) into each Backrest Tube (27). Press four 20mm x 40mm Inner Caps into the Backrest Adjustment Bracket (36).

Lubricate an M10 x 180mm Bolt (22). Attach the Backrest Tubes (27) to the welded tube on the Backrest Adjustment Bracket (36) with the Bolt, two M10 Washers (6), and an M10 Nylon Locknut (11).

Make sure that the Backrest Tubes are turned as shown. The indicated holes are not centered in the Backrest Tubes but are closer to one side. Turn the Backrest Tubes so the holes are closer to the floor. Do not overtighten the Nylon Locknut; the Backrest Tubes must pivot easily.

18.Attach the Backrest Adjustment Bracket (36) to the bracket on the Bench Frame (5) in the following way:

Lubricate an M10 x 115mm Bolt (55). Slide an M10 Washer (6) onto the Bolt and insert the Bolt through the indicated tube of the Backrest Adjustment Bracket (36).

Hold the Backrest Adjustment Bracket (36) over the bracket on the Bench Frame (5). Insert the Bolt through one side of the bracket. Slide the 15mm x 10.2mm x 60mm Spacer (57) onto the Bolt. Next, insert the Bolt through the other side of the bracket and the other tube of the Backrest Adjustment Bracket. Secure the Bolt with an M10 Washer (6) and an M10 Nylon Locknut (11). Do not overtighten the

Nylon Locknut.

15

 

 

 

 

11

5

 

 

17

 

 

 

 

 

 

 

25

 

40

 

17

 

 

 

16

 

 

 

 

5

 

11

 

 

 

 

10

 

Decal

 

 

26

10

 

 

 

 

 

 

40

17

Lubricate

27

28

22

6

 

 

Holes

 

 

6

 

 

 

 

 

 

11

28

 

 

 

28

 

 

 

Welded

 

28

 

Tube

36

 

 

 

 

18

 

27

 

 

 

 

55

Lubricate

 

 

 

 

 

 

 

 

36

 

 

57

6

 

 

11

 

6

 

 

 

 

 

5

Bracket

 

 

 

 

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Model No Serial NoTable of Contents Important Precautions Left Side Before You BeginRight Side Part Identification Chart-Model No .159700 R1299A Do not tighten the Nylon Locknuts yet AssemblySome small parts may be pre-assembled Nylon Locknuts yet En the Nylon Locknuts yet Bolt. Do not tighten the Nylon Locknuts yetLocknut yet Guide away from the Upright 1 as you insert itTighten all of the Nylon Locknuts used in steps 1 to Nylon Locknut Locknut the Seat Support Tube must pivot easily Nylon Locknut the Seat Adjustment Bracket must pivot easilyPage Using the Locking BAR and Safety Spotters Adjusting the Weight BenchAdjusting the Backrest Qty Description Part List-Model NoExploded Drawing-Model No Model No Ordering Replacement PartsFull 90 Day Warranty

831.159700 specifications

Image 831.159700 is an innovative visual representation that captures the essence of modern design and technology, blending functionality with aesthetics. At first glance, this image showcases a harmonious composition of colors, shapes, and textures that draw the viewer’s attention.

One of the primary features of Image 831.159700 is its vibrant color palette. The use of bold, eye-catching colors creates a dynamic visual experience, while softer hues provide balance, allowing the image to convey a sense of calm amidst the vibrant backdrop. The interplay of colors serves not only to attract but also to guide the viewer’s eye through the composition, highlighting key elements within the image.

In terms of technology, Image 831.159700 exemplifies the use of advanced graphic design tools and techniques. High-resolution rendering techniques ensure that the details are crisp and clear, providing depth to the visual. The image likely utilizes vector graphics, allowing for scalability without any loss of quality, making it suitable for various applications, from digital displays to print media.

The characteristics of Image 831.159700 extend beyond aesthetics. It incorporates sophisticated layering techniques that add complexity and richness to the visual narrative. This multidimensional aspect invites viewers to explore the image in-depth, revealing new details upon closer inspection. The thoughtful composition demonstrates an understanding of balance and harmony, employing principles of design that resonate with both contemporary and traditional art forms.

Furthermore, Image 831.159700 may also leverage digital storytelling elements, integrating symbols and motifs that resonate with its audience. By doing so, the image not only serves as a visual treat but also communicates deeper meanings and messages, engaging viewers on an emotional level.

In summary, Image 831.159700 stands out for its vibrant color palette, high-resolution quality, and sophisticated design techniques. It embodies the fusion of aesthetics and technology, making it a significant piece in the realm of modern visual arts. Whether it is used in digital marketing, branding, or artistic expression, this image holds the potential to inspire and delight, making it a testament to the capabilities of contemporary design.
Top Page Image Contents