Image 831.159701 user manual Adjusting the Backrest

Page 15

ADJUSTING THE BACKREST

To raise the Backrest (15), grip the end of the Backrest with one hand and pull it upward. The Backrest Adjustment Frame (36) will automatically lock into one of the tabs on the bracket on the Bench Frame (5).

To lower the Backrest (15), grip the end of the Backrest with one hand and pull it slightly upwards. Grip the handle (not shown) on the right side of the Backrest Adjustment Frame (36) with your other hand and pull the Backrest Adjustment Frame free of the tabs on the bracket on the Bench Frame (5). Lower the Backrest to the desired posi- tion and lock the Backrest Adjustment Frame into the desired tab on the bracket on the Bench Frame.

ADJUSTING THE SEAT

To raise the Seat (14), lift the narrow end of the Seat until the appropriate tab on the Seat Adjustment Bracket (45) engages the welded pin (not shown) on the right side of the Bench Frame (5).

To lower the Seat (14), use the handle on the Seat Adjustment Bracket (45) to disengage the Seat Adjustment Bracket from the pin. Lower the Seat to the desired position and engage the appropriate tab on the Seat Adjustment Bracket to the pin.

15

Handle

36

5

Adjustment

Bracket

 

Handle

45

14

Pin

 

 

 

5

15

Image 15
Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Model No Serial NoTable of Contents Important Precautions Before You Begin Right SideLeft Side Part Identification Chart-Model No .159701 R1200A Do not tighten the Nylon Locknuts yet AssemblyNylon Locknuts yet Do not tighten the Nylon Locknuts yet Locknut yet Guide away from the Upright 1 as you insert itTighten all of the Nylon Locknuts used in steps 1 to Locknut Locknut the Seat Support Tube must pivot easily Nylon Locknut the Seat Adjustment Bracket must pivot easilyPage Using the Locking BAR and Safety Spotters Adjusting the Weight BenchAdjusting the Backrest Qty Description Part List-Model NoExploded Drawing-Model No Ordering Replacement Parts Full 90 Day WarrantyModel No