5.Press a 25mm Round Inner Cap (51) into the end of a Weight Storage Tube (21).
While a second person holds a Crossbar (8) in the position shown, insert two M10 x 70mm Bolts (46) through the bracket on the Weight Storage Tube (21), the left Brace (2), and the bracket on the Crossbar. Thread an M10 Nylon Locknut (11) onto each Bolt.
Do not tighten the Nylon Locknuts yet.
6.Press a 25mm Round Inner Cap (51) into the end of the other Weight Storage Tube (21).
While a second person continues to hold the Crossbar (8), insert two M10 x 70mm Bolts (46) through the bracket on the Weight Storage Tube (21), the right Brace (2), and the bracket on the Crossbar. Thread an M10 Nylon Locknut (11) onto each Bolt.
Do not tighten the Nylon Locknuts yet.
7.Have a second person hold the other Crossbar (8) between the Uprights (1).
Attach the Crossbar (8) to the left Upright (1) with two M10 x 70mm Bolts (46), a Small Support Plate (16), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet.
Attach the Crossbar (8) to the right Upright (1) with two M10 x 70mm Bolts (46), a Small Support Plate (16), and two M10 Nylon Locknuts (11). Do not tight- en the Nylon Locknuts yet.
5 |
|
|
|
|
|
|
| 2 |
|
| 8 |
|
|
|
|
|
| 21 |
|
|
| 11 |
| 46 |
|
|
| 46 | 51 |
6 | 51 | 46 |
|
|
|
|
|
| |
|
|
| 21 |
|
| 46 |
|
|
|
|
| 2 | 8 |
|
|
|
|
| |
|
| 11 |
|
|
7 |
|
|
|
|
46 |
| 11 |
|
|
16 |
|
|
| |
|
| 8 |
| |
|
|
|
| |
|
| 11 | 11 |
|
46 |
|
|
| |
|
|
|
| |
|
|
| 11 |
|
|
|
|
| 16 |
|
|
|
| 46 |
|
| 1 |
|
|
|
|
| 1 |
|
|
|
|
| 46 |
8