CycleOps Comp 200E, PRO 300PT manual Press Down Arrow and then press

POWER ZONE 1		POWER ZONE 2
ANAR TH	450	ZONE 5	105%-120%
ZONE 1	0%-55%	ZONE 5	120%-133%
ZONE 2	55%-75%	ZONE 5	133%-165%
ZONE 3	75%-90%	PREVIOUS ZONE
ZONE 4	90%-105%	RESET
NEXT ZONE		RETURN
RETURN

MODE SELECT MODE SELECT

Power Zone 6	Power Zone 7
6) Press [DOWN ARROW] and then press	8) In Power Zone 2 screen repeat steps 3, 4,
[SELECT] to adjust [ZONE 2]. Repeat steps	and 5 to set information for [ZONE 5-6].
3, 4, and 5 to set [ZONES 2-4]. NOTE: The
lower % training zone will automatically set
to the previous zone's upper limit.
7) Once [ZONE 1-4] information has been
set, press [DOWN ARROW] to scroll to
[NEXT ZONE] and press [SELECT].

POWER ZONE 2
ZONE 5	105%-120%
ZONE 5	120%-133%
ZONE 5	133%-165%
PREVIOUS ZONE
RESET
RETURN

MODESELECT

Power Zone 8

9)To reset default zone settings, press [DOWN ARROW] to scroll to [RESET] and press [SELECT].

10)To begin a power zone based ride, press [DOWN ARROW] to scroll to [RETURN] and press [SELECT]. Press [DOWN ARROW] to scroll to [RETURN] and press [SELECT] once again.

15