CycleOps PRO 300PT, Comp 200E manual Settings Zeros

Settings (Zeros)

These settings determine if zero readings will be included in average readings. For example, when coasting zero powering readings are recorded. This setting determines if these zero coasting readings are included in the average console display.

MAIN MENU		RETURN TO RIDE
RETURN TO RIDE		1	USER A
SETUP USER RIDE	2		USER B
CLEAR MEMORY	3		USER C
	4		USER D
TEST	5		USER E
SETUP	6		USER F

MODE SELECT MODE SELECT

CYCLE COMPUTER POWER ZONE HEART RATE ZONE USER INFORMATION SETTINGS RETURN

MODESELECT

Settings (Zeros)

1)From [MAIN MENU] press [DOWN ARROW] to scroll to [SETUP USER RIDE] and press [SELECT].

SETTINGS

WATTS AVG ZEROS YES

SPEED AVG ZEROS YES

CAD AVG ZEROS YES

RESET

RETURN

MODESELECT

Settings (Zeros)

2)Press [DOWN ARROW] to scroll to through six (6) [USER] files and press [SELECT] to select a user file. (See "Setting User Information" to establish a user profile).

SETTINGS

WATTS AVG ZEROS YES

SPEED AVG ZEROS YES

CAD AVG ZEROS YES

RESET

RETURN

MODESELECT

Settings (Zeros)

3)Press [DOWN ARROW] to scroll to [SET- TINGS] and press [SELECT].

22

Settings (Zeros)

4)Press [DOWN ARROW] to scroll to [ZEROS] and press [SELECT].

5)Press [SELECT] to enter [WATTS AVG ZEROS]. Press [UP ARROW] or [DOWN ARROW] to toggle between [YES] or [NO]. Press [SELECT] to accept changes and reenter the scrolling menu.

6)Repeat steps 3, 4, and 5 for [SPEED AVG ZEROS] and [CAD AVG ZEROS]. Press [SELECT] to accept changes and reenter scrolling menu.

7)To reset user settings press [DOWN ARROW] to scroll to [RESET] and press [SELECT].

Settings (Zeros)

8)To begin a ride, press [DOWN ARROW] to scroll to [RETURN] and press [SELECT]. Press [DOWN ARROW] to scroll to [RETURN] and press [SELECT].