CycleOps PRO 300PT, Comp 200E manual Setup Modes

Setup (Modes)

Changes made in setup mode apply to ALL users.

SETUP

TIME AND DATE

MODES

RETURN

MODESELECT

MODES
SETUP TIME	9
COMP MODE	PT300
RECORD CNTR	SPEED
LANGUAGE	ENGLISH
BACKLIGHT	UI
RESET
RETURN

MODESELECT

Setup Modes 1

1)From [MAIN MENU] press [DOWN ARROW] to scroll to through to [SETUP] and press [SELECT].

2)Press [SELECT] to enter [MODES].

Setup Modes 2

3)Press [SELECT] to enter [SLEEP TIME].

4)Press [UP ARROW] or [DOWN ARROW] to toggle between 1-9 (displayed in minutes). This determines duration of time before the console goes to sleep without input from the bike or a heart rate signal is detected. Press [SELECT] to accept changes and reenter scrolling menu.

5)Press [DOWN ARROW] to scroll to [COMP MODE] and press [SELECT].

6)Press [DOWN ARROW] to toggle between [200E] or [PT300]. Select setting depending CycleOps Indoor Cycle model you own. Press [SELECT] to accept changes and reenter scrolling menu.

7)Press [DOWN ARROW] to scroll to [RECORD CNTR] and press [SELECT].

8)Press [DOWN ARROW] to toggle between [SPEED] and [HEART]. Press [SELECT] to accept changes and reenter scrolling menu. This function sets when the ride time clock auto starts and stops. In [SPEED] mode, the run time clock will stop when speed reaches zero. In [HEART] mode, the run time clock time will continue to record as long as heart rate signal is detected.

9)Press [DOWN ARROW] twice to scroll to [BACKLIGHT] and press [SELECT].

10)Press [DOWN ARROW] to select either [UI], [UI DATA] or [OFF]. This function determines when the backlight will be illuminated. [UI] = User Interface (when buttons are pushed), [UI DATA] = User Interface and Data input, [OFF] = Backlight is never illuminated. Press [SELECT] to accept changes and reenter scrolling menu. NOTE: Use of backlight will reduce battery life.

11)To reset user settings select press [DOWN ARROW] and press [SELECT].

12)Press [DOWN ARROW] to scroll to [RETURN] and press [SELECT] to return to [MAIN MENU].

24