Bowflex 3.1 Bench manual Assembly Instructions, Attaching Front and Rear Stabilizers

Page 7

Assembly Instructions

STEP 1: Attaching Front and Rear Stabilizers

2

15

11
Parts
• Bench Frame (#1)
• Rear Stabilizer (#2)
• Front Stabilizer (#3)
Hardware	Qty
• 3/8 x 3 inch Bolts (#12)	2
• 3/8 x 1 inch Bolts (#11)	3
• 3/8 Washers (#15)	7
• 3/8 Nuts (#13)	2

Tools

• 7/32 Allen Wrench

1

3

13

15

12

1-1 Attach the Front Stabilizer (3) to the Bench Frame (1) using the hardware shown.

1-2 Tighten hardware.

1-3 Attach the Rear Stabilizer (2) to the Bench Frame (1) using the hardware shown.

1-4 Tighten hardware.

Image 7

Contents SelectTech 3.1 Bench Assembly/Owner’s Manual Table of Contents Important Safety Instructions Important Safety PrecautionsSafety Warning Labels Hardware and Tool Guide Before You AssembleItem # Qty Description Parts GuideAttaching Front and Rear Stabilizers Assembly InstructionsAttaching Back Pad and Seat Bottom to Bench Frame Attaching Leg Hold Down Assembly to Bench Frame Congratulations Bench PositionsCompanion Exercise Equipment Bench MaintenanceWhat is Covered Warranty InformationIMPORTANT! Mail Within 30 Days of Purchase Bowflex SelectTech 3.1 Bench Warranty Registration CardPlease fold over and tape before mailing What Is CoveredOffices in the United States Important Contact Numbers