12.The Console (5) requires four 1.5V “D” batteries (not included); alkaline batteries are recom- mended. IMPORTANT: If the elliptical exercis- er has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the console displays or other electronic components may become dam- aged. See the inset drawing. Remove the bat- tery cover from the Console and insert four bat- teries into the Console. Make sure that the bat- teries are oriented as shown by the diagram in the battery compartment. Then, reattach the bat- tery cover.
Note: The Console (5) can be operated with an optional power supply instead of batteries. To purchase a power supply, call the telephone number on the front cover of this manual. Plug one end of the power supply into the jack on the console. Plug the other end of the power supply into an appropriate outlet that is properly installed in accordance with all local codes and ordinances.
Have a second person hold the Console (5) near the Upright (6) as shown. Connect the console wire to the Wire Harness (48). Insert the excess wire downward into the Upright.
Attach the Console (5) to the Upright (6) with four M4 x 16mm
12 |
|
| Battery |
| Cover |
| 5 |
| Batteries |
| 5 |
| Console |
| Wire |
| 6 |
79 | 48 |
|
13.Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical exerciser.
11