3.Attach the Left Arm (12) to the Upright Base (6) with two M10 x 25mm Button Screws (83) and two M10 Split Washers (70). Note: Make sure that the grip tape is on top.
Attach the Right Arm (not shown) in the same manner.
4.Orient the Upright Stabilizer (7) as shown. Attach the Upright Stabilizer to the Upright Base (6) with two M8 x 70mm Carriage Bolts (76) and two M8 Black Nylon Locknuts (71).
5.Slide the Base (4) into the Upright Base (6). Tip the Upright Base onto its back. Attach the Base to the Upright Base with the four M8 x 25mm Patch Screws (25).
3 |
|
|
|
|
|
| 12 70 | Grip | |
|
| Tape | ||
|
|
|
| 83 |
|
| 70 | 83 |
|
|
| 6 |
|
|
4 |
|
|
|
|
|
|
| 7 | 76 |
| 71 |
|
| |
71 | 6 |
|
|
|
5 |
|
|
|
|
|
|
|
| Tip |
| 4 | 6 |
|
|
|
|
|
| |
|
| 25 | 25 |
|
7 |
|
|
| |
|
|
|
| |