ASSEMBLY
Assembly requires two persons. Place all parts of the recumbent cycle in a cleared area and remove the pack- ing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench 
.
PART CHART
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity used in assembly. Note: Some small parts may have been
5/16Ó Black Flat Washer (57)Ð12 | M8 Nylon Locknut (56)Ð8 | M8 Curved Washer (28)Ð7 | ||
M5 x 15mm | #10 x 5/8Ó |
| Console | #8 x 3/4Ó |
Screw (69)Ð1 | Screw (30)Ð1 | Screw (20)Ð4 | Screw (21)Ð1 | |
*Zinc M8 x 40mm Carriage Bolt (82)Ð4 | M8 x 45mm Button Screw (17)Ð3 | |||
1/4Ó x 1 1/2Ó Hex Screw (73)Ð4 |
| M8 x 70mm Carriage Bolt (72)Ð2 | ||
| M8 x 80mm Carriage Bolt (63)Ð2 | 1/4Ó x 5/8Ó Hex Screw (29)Ð4 | ||
*The four Zinc M8 x 40mm Carriage Bolts (82) are packaged separately from the other hardware. The four black M8 x 40mm Carriage Bolts (24) contained in the hardware pack should be discarded.
5