1.BEFORE YOU BEGIN
What is included
1 x LEDsplash™ 152B
Warranty Card
User Manual
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.
AC Power
| To determine the power requirements for a particular fixture, see the label affixed to the back plate of |
| the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating is its average |
| current draw under normal conditions. All fixtures must be powered directly off a switched circuit and |
| cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer |
| channel is used solely for a 0% to 100% switch. Before applying power to a fixture, check that the |
| source voltage matches the fixture’s requirement. |
Warning! | All fixtures must be connected to circuits with a suitable Earth Ground. |
Contact Us
World W ide
General Information | CHAUVET® | |
| 3000 North 29th Court | |
| Hollywood, FL 33020 | |
| voice: | 954.929.1115 |
| fax: | 954.929.5560 |
| toll free: 800.762.1084 | |
Technical Support | CHAUVET® | |
| 3000 North 29th Court | |
| Hollywood, FL 33020 | |
| voice: | 954.929.1115 (Press 4) |
| fax: | 954.929.5560 (Attention: Service) |
World Wide Web | www.chauvetlighting.com | |
LEDsplash™ 152B User Manual | 3 | 3/9/2010 3:02 PM |