Safety Instructions
Please read these instructions carefully, which includes important information about the installation, usage and maintenance of this product.
| Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that |
| they also receive this instruction booklet. |
| Always make sure that you are connecting to the proper voltage, and that the line voltage you are |
| connecting to is not higher than that stated on the decal or rear panel of the fixture. |
| This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to |
| rain or moisture. |
| Make sure there are no flammable materials close to the unit while operating. |
| The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent |
| surfaces. Be sure that no ventilation slots are blocked. |
| Always disconnect from power source before servicing or replacing lamp or fuse and be sure to |
| replace with same lamp source. |
| Secure fixture to fastening device using a safety chain. |
| Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher |
| than this. |
| In the event of a serious operating problem, stop using the unit immediately. Never try to repair the |
| unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please |
| contact the nearest authorized technical assistance center. |
| Never connect the device to a dimmer pack. |
| Make sure the power cord is never crimped or damaged. |
| Never disconnect the power cord by pulling or tugging on the cord. |
| Avoid direct eye exposure to the light source while it is on. |
Caution! | There are no user serviceable parts inside the unit. Do not open the housing or |
| attempt any repairs yourself. In the unlikely event your unit may require service, |
| please contact CHAUVET® at: |
LEDsplash™ 152B User Manual | 4 | 3/9/2010 3:02 PM |