Fostex X-12 owner manual Basic Operation playback, You can play back the recorded Track

Page 11

Model X-12 Owner's Manual

Basic Operation (playback)

You can play back the recorded Track 1.

3

3

2 1

1Press the [REW] button to rewind the tape to the beginning of the tape (counter "000").

2Press the [PLAY] button to start playing back the tape from the "000" position.

<CAUTION>

Be careful not to press the [REC] button by mistake.

Note that the recording track is always in the selected state.

3Slowly raise the channel 1 playback level fader for track 1, then adjust the sound

balance with the playback [PAN] knob.

The same as when recording, the headphone volume will increase as the [LINE OUT/PHONES] knob is slowly raised.

The sound image can be moved left or right by rotating the [PAN] knob in either direction.

<CAUTION>

When monitoring the sound via headphones for a long period of time, do not set the level too high. Otherwise, your hearing may be damaged.

3

For playback of the sound recorded on the various tracks (1 - 4), the fader/[PAN] knobs corresponding to each track number is used i.e. track 1 playback sound by the channel 1 knob, the track 2 playback sound by the channel 2 knob, and so on.

Track 2

Track 3

Track 1

Track 4

For playback of tape recorded on a boom box or cassette deck, the channel 1 and 2 faders and [PAN] knobs will be used regardless to whether the A side or B side is to be played back.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model Safety Instructions Table of Contents Cassette tape suitable for recording Before UsingUsing write-protection tabs Important Lets not use it this way Names and Functions Counter / Reset button Reset AC adaptor connector DC Record track selector REC TrackPower switch Power Record track select indicatorPlayback Panpot knob PAN Record indicator RECPower indicator Power Playback level fader 1Press the Play button to forward the tape for a few seconds Basic Operation recordingAC outlet Try speaking into the mic For optimum gain, adjust the LINE-MIC knob CW toward MICPut X-12 in the record standby mode You can play back the recorded Track Basic Operation playbackOverdubbing Advanced OperationX-12 will enter record pause mode Using the Playback PAN knob Mixdown Up to the playback start point reset the counter toUsing a tape recorded on a boom box or cassette deck Maintenance TroubleshootingBlock Diagram SpecificationsSpecifications Accessories optionFostex Distributors List in Europe
Top Page Image Contents