Fostex X-12 owner manual Using the Playback PAN knob

Page 14

Model X-12 Owner's Manual

The following table indicates the switch and knob settings used for overdubbing to Tracks 3 and 4. Refer to this table and to the steps described on the previous page to overdub the keyboard to Track 3 and vocal to Track 4.

 

Sound source

[LINE-MIC] knob

[REC TRACK]

Playback level fader

Playback [PAN] knob

 

selector

 

 

 

 

 

 

 

 

 

Adjust playback levels of

Adjust the playback sound

Overdubbing the

Plug the keyboard

Adjust to optimum

Select track 3

for comfortable monitoring

keyboard to

o u t p u t t o t h e

level by CCW rotation

tracks 1 and 2 with playback

(Refer to <Using the

for recording.

Track 3

[INPUT] jack.

(LINE) of the knob.

faders 1 and 2.

Playback [PAN] knob>

 

 

 

 

 

 

below).

 

 

 

 

 

 

 

 

 

 

 

Adjust the playback sound

Overdubbing the

Plug the mic into the

Adjust to optimum

Select track 4

Adjust playback levels in

for comfortable monitoring

Vocal to Track 4

[INPUT] jack.

level by rotating the

for recording.

tracks 1 - 3 with playback

(Refer to <Using the

 

 

knob CW (MIC).

 

level faders 1, 2 and 3.

Playback [PAN] knob>

 

 

 

 

 

below).

 

 

 

 

 

 

<Using the Playback [PAN] knob>

When you are monitoring the recording sound and playback sound simultaneously, refer to the table below for the relationship between the position of the [PAN] knob and the sound balance.

Adjust the balance according to your needs. The recording sound will be always positioned in the center.

[PAN] position

Monitoring sound position

Center

PAN

Both playback sound and recording sound will be centered.

L R

Hard "R"

PAN

The playback sound will be positioned on the right and the recording sound will be centered.

L R

Hard "L"

PAN

The playback sound will be positioned on the left and the recording sound will be centered.

L R

14

Image 14
Contents Model Safety Instructions Table of Contents Cassette tape suitable for recording Before UsingUsing write-protection tabs Important Lets not use it this way Names and Functions Record track select indicator AC adaptor connector DC Record track selector REC TrackPower switch Power Counter / Reset button ResetPlayback level fader 1 Record indicator RECPower indicator Power Playback Panpot knob PANPress the Play button to forward the tape for a few seconds Basic Operation recordingAC outlet Try speaking into the mic For optimum gain, adjust the LINE-MIC knob CW toward MICPut X-12 in the record standby mode Basic Operation playback You can play back the recorded TrackAdvanced Operation OverdubbingX-12 will enter record pause mode Using the Playback PAN knob Up to the playback start point reset the counter to MixdownUsing a tape recorded on a boom box or cassette deck Troubleshooting MaintenanceSpecifications Block DiagramAccessories option SpecificationsFostex Distributors List in Europe