JVC LVT0954-007A manual Recording a Disc onto a Tape -Disc Synchronized Recording, Prepare a disc

English

Recording a Disc onto a Tape —Disc Synchronized Recording

•When recording from an DVD, the current title or chapter number does not appear on the display.

Available for: DVD SVCD VCD Audio CD MP3

Using the disc synchronized recording method, you can start and stop disc play and recording at the same time.

•	During the disc synchronized recording, some operations
	which would affect the recording (both audio and video)
	are prohibited.
•	You can use only type I tapes for recording.

D V D

REC indicator

TAPEREC

Elapsed playing time

• When you want to record onto both sides of a tape, you

can set the reverse mode to do so. Recording

automatically stops after recording in the 2 direction.

Therefore, make sure that the tape direction is 3 when

recording with the reverse mode on.

1 Prepare a disc.

After placing a disc, press DVD #/8 (or DVD SELECT 3 on the remote control), then 7 before going to the next step.

•You can create a program (see page 37) or select the random play mode (see page 39) as you wish.

2 Put a recordable cassette into the cassette holder.

3 Press REV. MODE to select the reverse mode.

•Each time you press the button, the reverse mode changes as follows:

Recording on	Recording on
one side.	both sides once.
		*

* will be shown during recording when you select

.

4 Press REC on the main unit.

Recording starts and the REC indicator starts flashing on the display.

Ex.: A DVD is now recorded.

After recording, both the DVD player and the cassette deck stop automatically.

To stop recording, press 7.

When recording from some DVDs which have their menu

Playback may not go further from the point where the menu is shown. (You cannot select any item on the menu during recording.) In such a case, stop the recording and select the point where you want to start recording as follows:

1Start disc playback.

2Select the item on the disc menu which you want to record. The selected item starts playback.

3Press 8 where you want to start recording.

4Press REC to start recording.

When recording a disc (except DVD and MP3 disc)

•A 4-second blank is automatically made on the tape before each track. To record without the blank, press DVD #/8 twice so that disc playback is paused in step 1, then go to next steps.

•When the front side of the tape ends in the middle of a track, the

recording on the reverse side starts from the beginning of that

track (if the reverse mode is set to ).

However, if the front side ends within 12 seconds from the beginning of a track, recording on the reverse side starts from the previous track.

C D

REC indicator

TAPEREC

Current track number Elapsed playing time

Ex.: An audio CD is now recorded.

51