JVC LVT0954-007A manual Maintenance, General Notes, Cleaning the unit, Handling discs

Page 69

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

English

General Notes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

•Store discs and tapes in their cases, and keep them in cabinets or on shelves.

•Keep the electronic swing panel closed when not in use.

Cleaning the unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water- diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following:

-DO NOT wipe it with a hard cloth.

-DO NOT wipe it strong.

-DO NOT wipe it with thinner or benzine.

-DO NOT apply any volatile substance such as insecticides to it.

-DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

•Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

•Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

Handling cassette tapes

•If the tape is loose in its cassette, take up the slack by inserting a

pencil in one of the reels and rotating.

• If the tape is loose, it may get stretched, cut, or caught in the cassette.

• Be careful not to touch the tape surface.

•Avoid the following places to store the tape:

- In dusty places

- In direct sunlight or heat - In moist areas

-On a TV or speaker

-Near a magnet

66

Image 69

Contents Consists of CA-UXA7DVD and SP-UXA7DVD UX-A7DVDUX-A7DVD Important for Laser Products Introduction PrecautionsContents Location of the Buttons and Controls Main UnitMain unit Display window Display window on the electronic swing panelSee pages in parentheses for details Remote ControlPlayable Disc Types About DiscsAbout audio formats Disc StructureConnecting Antennas Putting the Batteries into the Remote ControlGetting Started UnpackingYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo remove the speaker grilles Connecting a TVTo select the color system Speaker grilles are removable as illustrated belowConnecting Other Equipment To connect analog audio equipment Adjusting the Voltage SelectorGo to the next page to start the setting Setting the DVD PlayerGo to To select the monitor type on the next To select the On-screen language for the setting menu-StepGo to To select the output signal type on the next To select the monitor type-StepGuidelines to select the monitor type Guidelines to select the output signal type To select the output signal type-StepPlayback Output signals DiscSetting the Clock To show the clock when the unit is turned onTo turn off the clock indication Basic and Common Operations Remote controlTo turn off the unit automatically Auto Power Off Turning On the PowerTo turn down the volume level temporarily Adjusting the VolumeSelecting the Sources and Starting Play To listen to the sound from external equipment, pressReinforcing the Bass Sound Adjusting the ToneTo select the illumination color Changing the Display IlluminationTo create your favorite colors To change the display brightnessOn the main unit only Adjusting the Audio Input Level Prohibiting Disc EjectionListening to FM and AM Broadcasts Remote controlSetting the AM Tuner Interval Spacing Tuning in to a StationTo change the FM reception mode Tuning in to a Preset Station Presetting StationsPress the number buttons to select a preset number Press SET againDVD Playing Back DiscsLoading a Disc On-screen guide iconsTo prevent screen burn-out with the screen saver DVD Basic Operations To go to another chapterTo show the on-screen indication To increase the DVD’s sound level SVCD/VCD/Audio CD Basic OperationsCurrent disc information Disc playing informationTo stop play for a moment, press DVD #¥8 or 8 on To go to another trackWhile playing a disc To erase the on-screen indication, press on ScreenAbout MP3 disc MP3 Basic OperationsUnavailable functions for MP3 disc Available for MP3To go to another group Searching for a Particular PointForward search Reverse searchPlaying Back by Using the Disc Menu When playing a DVDWhen playing a Svcd or VCD Repeating Playback PBC operation conceptRepeat play B repeat play On the remote control only Press Play Mode during playPress Cursor 3/2 to move to A-B Repeat A-B repeat indication appears on the TVProgramming the Playing Order Program Play To check the programed contents To modify the programTo exit from the program play To exit from the random play Playing at Random-Random PlayPress Cursor 3/2 to move to RANDOM, then press Enter To skip the playing title, track, or group, press ¢Tape Playing Back TapesPlaying Back a Tape To play both sides-Reverse modeFunctions in this section do not work for MP3 discs Special Disc PlaybackPress Cursor 3/2 to move to Chap SEARCH, then press Enter To erase the on-screen indication, press Play ModeEnter a chapter number by pressing the number buttons 0 to Press Cursor 3/2 to move to Time SEARCH, then press EnterViewing the Desired Chapters/Tracks- Digest Selecting Multi-Angle Views To change angle viewsTo show all angle views Selecting the Subtitle Language Selecting the Audio Language or SoundPlaying Back in Slow-Motion-Slow Playing a Still Picture/Frame-by-FrameEnjoying Virtual Surround Sound Zooming in the Picture-ZoomYou can zoom a picture by 2 times To go back to normal play, press Zoom while holdingDVD Tape FM/AM AUX/MD RecordingBefore You Start Recording on a Tape To clean the heads, capstans, and pinch rollersTo protect your recordings To keep the best recording and playback sound qualityPrepare a disc Recording a Disc onto a Tape -Disc Synchronized RecordingPress REC on the main unit To stop recording, pressRecording Other Sources onto a Tape When you press REC while pausing a trackTo record a single track during play To record from external equipmentBass Using the MicrophoneIf howling or squealing feedback occurs while using To adjust the keySinging Along Karaoke To apply an echo to your voiceTOP Menu Changing the DVD Initial SettingsSetting menu Basic ProcedureChanging the Initial Language Settings Changing the Various Audio SettingsMore about Down MIX Changing the System Settings Changing the Display SettingsOn the System menu, you can change the following settings More about CompressionOn the remote control only Press Enter while holding down Setting the parental lockUnlocking the Parental Lock Temporarily Press Cursor 5/∞ to select YES, then pressDisplay Using the TimersHow the Recording Timer actually works Using the Recording TimerUsing the Daily Timer How the Daily Timer actually worksTo turn off the Recording Timer after its setting is done To turn off the Daily Timer after its setting is done Volume setting appears in the main displayTo turn on the Daily Timer again You can also use the source selecting buttonsHow the Sleep Timer actually works Using the Sleep TimerTimer Priority Press SleepSet AV Compulink Mode in the System menu as follows Using AV Compu Link Control SystemAV Compu Link Connection One-touch DVD playCleaning the unit MaintenanceGeneral Notes Handling discsSymptom TroubleshootingPossible Cause ActionDisc Tape Table of Language Codes Table of Country/Area Codes Zimbabwe Specifications 110V 127V 230V