JVC LVT0954-007A manual Recording Other Sources onto a Tape, To record a single track during play

To record a single track during play

Available for: SVCD VCD Audio CD

•You can do this operation for SVCD or VCD only without the PBC function.

On the main unit ONLY:

While playing back a track you want to record, press REC.

The playback of the track is stopped, and the same track starts playing from the beginning again. This time, the cassette deck starts recording the track.

•After the track is recorded, both the DVD player and the cassette deck stop automatically.

If you do the above operation for a DVD or an MP3 disc

Recording starts from the point where you press the button and does not stop after the current chapter or track is recorded. (Playback also continues.)

When you press REC while pausing a track

Recording starts from that point.

Recording Other Sources onto a Tape

You can record from FM or AM broadcasts or the sound from external equipment connected to the AUX/MD jacks onto a tape.

•You can use only type I tapes for recording.

•When you want to record onto both sides of a tape, you can set the reverse mode to do so. Recording automatically stops after recording in the 2 direction. Therefore, make sure that the tape direction is 3 when recording with the reverse mode on.

1 Prepare the source to record.

To record from FM/AM broadcasts:

Press FM/AM to select either “FM” or “AM,” then tune in to the station you want.

•For more detailed tuner operations, see pages 24 to 26.

To record from external equipment:

Press AUX/MD to select “AUX/MD” and prepare the external equipment.

•Adjust audio input level through the AUX/MD jacks if necessary. (See page 23.)

•For operation of external equipment, see its manual also.

2 Put a recordable cassette into the cassette holder.

3 Press REV. MODE to select the reverse mode.

•Each time you press the button, the reverse mode changes as follows:

Recording on	Recording on
one side.	both sides once.

*

*will be shown during recording when you select

.

4 Press REC on the main unit.

Recording starts and the REC indicator starts flashing on the display.

REC indicator

TAPEREC

Ex.: When recording from an FM broadcast.

•When recording from external equipment, start playback on external equipment after the following indication appears in the main display.

REC indicator

TAPEREC

To stop recording, press 7.

English

52