JVC LVT0954-010A, 0303MWMMDWJEM manual Disc Structure, About audio formats

Page 10

English

About audio formats

Some audio formats used on discs are described below:

Linear PCM

Uncompressed digital audio, the same format used on CDs and most studio masters.

DVD supports 2-channels at sampling rates of 48/96 kHz and quantization of 16/20/24 bits.

Audio CD/Video CD is limited to 2-channels at 44.1 kHz at 16 bits.

Dolby Digital

A surround audio format configured with up to six channels. Because the “LFE (Low-Frequency Effect for sub-woofer, etc.)” channel is an auxiliary channel, so this format is called “5.1-channel system.”

Not all Dolby Digital discs contain six (5.1) channel information.

DTS (Digital Theater Systems)

A surround audio format configured with up to six (5.1) channel which is the same as Dolby Digital. Because the compression ratio is lower than for Dolby Digital, it provides wider dynamic range and better separation. Not all DTS discs contain six (5.1) channel information.

MPEG Multichannel

A surround audio format which can handle the augmentative 7.1-channel format (rare for home use), as well as 5.1-channel.

IMPORTANT:

This unit does not provide the DTS decoding function.

The sound signals of DTS are only output through the DVD OPTICAL DIGITAL OUT terminal and are not output through the speakers of this unit.

To listen to the sound of DTS, connect a DTS decoder or an amplifier compatible with DTS.

To reproduce the multichannel sounds such as Dolby Digital 5.1 ch, DTS Digital Surround and MPEG Multichannel, connect an amplifier or a decoder compatible with these multichannel sources to this unit. (See page 11.)

Playing back an Audio CD whose sound is encoded with DTS may generate noise and damage the speakers.

When playing such a disc, turn the volume level on this unit to minimum.

Disc Structure

A DVD consists of “titles,” and each title may be divided into “chapters.” (See Example 1.)

For example, if a DVD disc contains some movies, each movie may have its own title number, and it may be further divided into chapters.

Example 1: DVD

On the other hand, a SVCD, VCD, and Audio CD consist of “tracks.” (See Example 2.)

In general, each track has its own track number. (On some discs, each track may also be divided by Indexes.)

Example 2: SVCD/VCD/Audio CD

7

Image 10
Contents UX-A7DVD Consists of CA-UXA7DVD and SP-UXA7DVDUX-A7DVD Important for Laser Products Precautions IntroductionContents Main Unit Location of the Buttons and ControlsMain unit Display window on the electronic swing panel Display windowRemote Control See pages in parentheses for detailsAbout Discs Playable Disc TypesDisc Structure About audio formatsGetting Started Connecting AntennasPutting the Batteries into the Remote Control UnpackingAM antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM antennaTo select the color system Connecting a TVTo remove the speaker grilles Speaker grilles are removable as illustrated belowConnecting Other Equipment To stop and cancel the display demonstration manually To connect analog audio equipmentSelecting the output signal type Setting the DVD PlayerTo select the On-screen language for the setting menu-Step Setting is finished On the remote control onlyPress Cursor ∞ repeatedly to move Press Choice while holding down ShiftGo to To select the monitor type on the next Press Cursor 3/2 to select the language you wantTo select the monitor type-Step Go to To select the output signal type on the nextGuidelines to select the monitor type Playback Output signals To select the output signal type-StepGuidelines to select the output signal type DiscTo turn off the clock indication power save mode Setting the ClockTo show the clock when the unit is turned on Remote control Basic and Common OperationsTurning On the Power To turn off the unit automatically Auto Power OffSelecting the Sources and Starting Play Adjusting the VolumeTo turn down the volume level temporarily To listen to the sound from external equipment, pressAdjusting the Tone Reinforcing the Bass SoundTo create your favorite colors Changing the Display IlluminationTo select the illumination color To change the display brightnessAdjusting the Audio Input Level Prohibiting Disc Ejection On the main unit onlyRemote control Listening to FM and AM BroadcastsTuning in to a Station Setting the AM Tuner Interval SpacingTo change the FM reception mode Press the number buttons to select a preset number Presetting StationsTuning in to a Preset Station Press SET againPlaying Back Discs DVDOn-screen guide icons Loading a DiscTo prevent screen burn-out with the screen saver To go to another chapter DVD Basic OperationsTo show the on-screen indication Current disc information SVCD/VCD/Audio CD Basic OperationsTo increase the DVD’s sound level Disc playing informationWhile playing a disc To go to another trackTo stop play for a moment, press DVD #¥8 or 8 on To erase the on-screen indication, press on ScreenUnavailable functions for MP3 disc MP3 Basic OperationsAbout MP3 disc Available for MP3Forward search Searching for a Particular PointTo go to another group Reverse searchWhen playing a DVD Playing Back by Using the Disc MenuWhen playing a Svcd or VCD PBC operation concept Repeating PlaybackRepeat play For SVCD, VCD, or Audio CD On the remote control only Press Play Mode during playB repeat play Press Cursor 3/2 to move to A-B RepeatPress Cursor 3/2 to move to PROGRAM, then press Enter Press Play ModeProgramming the Playing Order Program Play To program other titles, tracks, or groups, repeat stepTo modify the program To check the programed contentsTo exit from the program play Press Cursor 3/2 to move to RANDOM, then press Enter Playing at Random-Random PlayTo exit from the random play To skip the playing title, track, or group, press ¢Playing Back Tapes TapeTo play both sides-Reverse mode Playing Back a TapeSpecial Disc Playback Functions in this section do not work for MP3 discsEnter a chapter number by pressing the number buttons 0 to To erase the on-screen indication, press Play ModePress Cursor 3/2 to move to Chap SEARCH, then press Enter Press Cursor 3/2 to move to Time SEARCH, then press EnterViewing the Desired Chapters/Tracks- Digest To change angle views Selecting Multi-Angle ViewsTo show all angle views Selecting the Audio Language or Sound Selecting the Subtitle LanguagePlaying a Still Picture/Frame-by-Frame Playing Back in Slow-Motion-SlowYou can zoom a picture by 2 times Zooming in the Picture-ZoomEnjoying Virtual Surround Sound To go back to normal play, press Zoom while holdingRecording DVD Tape FM/AM AUX/MDTo protect your recordings To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To keep the best recording and playback sound qualityPress REC on the main unit Recording a Disc onto a Tape -Disc Synchronized RecordingPrepare a disc To stop recording, pressTo record a single track during play When you press REC while pausing a trackRecording Other Sources onto a Tape To record from external equipmentUsing the Microphone BassSinging Along Karaoke To adjust the keyIf howling or squealing feedback occurs while using To apply an echo to your voiceChanging the DVD Initial Settings TOP MenuBasic Procedure Setting menuChanging the Various Audio Settings Changing the Initial Language SettingsMore about Down MIX On the System menu, you can change the following settings Changing the Display SettingsChanging the System Settings More about CompressionUnlocking the Parental Lock Temporarily Setting the parental lockOn the remote control only Press Enter while holding down Press Cursor 5/∞ to select YES, then pressUsing the Timers DisplayUsing the Recording Timer How the Recording Timer actually worksHow the Daily Timer actually works Using the Daily TimerTo turn off the Recording Timer after its setting is done To turn on the Daily Timer again Volume setting appears in the main displayTo turn off the Daily Timer after its setting is done You can also use the source selecting buttonsTimer Priority Using the Sleep TimerHow the Sleep Timer actually works Press SleepAV Compu Link Connection Using AV Compu Link Control SystemSet AV Compulink Mode in the System menu as follows One-touch DVD playGeneral Notes MaintenanceCleaning the unit Handling discsPossible Cause TroubleshootingSymptom ActionDisc Tape Table of Language Codes Table of Country/Area Codes Zimbabwe Specifications EN, CS Victor Company of JAPAN, Limited 0303MWMMDWJEM