JVC LVT0954-010A Adjusting the Audio Input Level Prohibiting Disc Ejection, On the main unit only

English

Adjusting the Audio Input Level Prohibiting Disc Ejection

If the sound from the component connected to this unit is too loud or is not loud enough when changing from another source to “AUX/MD” (without changing the volume level), you can change the audio input level through the AUX/MD jacks.

1 Press AUX/MD so that “AUX/MD” appears in the main display.

2 Press and hold SET on the remote control for more than 2 seconds.

•Each time you press and hold the button, the audio input level alternates between “LEVEL 1” and “LEVEL 2.”

LEVEL 1: Select when the sound is too loud (initial setting).

LEVEL 2: Select when the sound is not loud enough.

You can prohibit disc ejection from the unit and can lock discs—Disc Lock.

On the main unit ONLY:

To prohibit disc ejection, press and hold 7, then press REV. MODE when the unit is in standby mode. “LOCKED” appears in the main display for a while, and the loaded disc is locked.

If you try to eject the locked disc, “LOCKED” appears to inform you that the Disc Lock is in use.

To cancel the prohibition and unlock the disc, repeat the above procedure.

“UNLOCKED” appears in the main display for a while, and the loaded disc is unlocked.

If you change the audio input level through the AUX/MD jacks

The recording level through the AUX/MD jacks also changes. Selecting “LEVEL 2” rather than “LEVEL 1” makes the sound recorded louder.

23