JVC 0303MWMMDWJEM manual Singing Along Karaoke, To apply an echo to your voice, To adjust the key

Page 57

Singing Along (Karaoke)

You can enjoy singing along (Karaoke) by using the microphone.

IMPORTANT:

Always set the MIC VOL control to MIN when connecting or disconnecting the microphone.

When you do not use the microphone, keep the microphone unconnected.

If howling or squealing (feedback) occurs while using

the microphone, take the following actions to prevent these noises.

Adjust the MIC VOL and VOLUME controls (or VOLUME + / – on the remote control).

Avoid pointing the microphone towards the speakers.

1 Rotate the MIC VOL control to MIN.

2 Connect the microphone (not supplied) by plugging it into the MIC jack.

3 Start playing the source—disc, tape or external equipment connected to the AUX/MD jacks.

When playing a multiplex karaoke disc, you can select the audio channel to play back. (See page 46.)

4 Rotate the MIC VOL and VOLUME controls (or VOLUME + / – on the remote control) as you sing into the microphone.

By pressing REC, you can record your singing along if you want. (For more details, see pages 51 and 52.)

To apply an echo to your voice

On the remote control ONLY:

Press DIGITAL ECHO so that the ECHO indicator lights up on the display.

ECHO indicator

ECHO 1

V C D

Each time you press the button, the echo level changes as follows:

ECHO LEVEL 1 ECHO LEVEL 2

ECHO LEVEL OFF ECHO LEVEL 3 (Canceled)

As the number increases, a stronger echo effect applies to your voice.

To adjust the key

You can adjust the key of the sound to fit to your voice.

This function is available while playing back DVDs, SVCDs, VCDs, or Audio CDs loaded on the DVD player.

On the remote control ONLY:

Press KEY CONTROL # or KEY CONTROL I to adjust the key.

The following display appears.

• You can also check your key adjustment on the TV.

C D

Current setting

You can adjust the key within the range from “–6” to “+6” by 1 step.

To raise the key, press KEY CONTROL #. To lower the key, press KEY CONTROL I.

To cancel the key control, set the key to “0” by pressing KEY CONTROL # or KEY CONTROL I.

When the current title or track finishes playing

The key returns to “0.”

When the 3D PHONIC function (see page 48) is activated

If you set the key to other than “0,” the 3D PHONIC function is temporarily canceled even though the 3D PHONIC indicator lights up. Setting the key back to “0” makes the 3D PHONIC function activated again.

To use the microphone only

Without any background sound, you can use your microphone and record your voice if you want.

1Rotate the MIC VOL control to MIN.

2Connect the microphone.

3Press AUX/MD to select “AUX/MD” as the source.

If external equipment is connected to the AUX/MD jacks, turn it off.

4Rotate the MIC VOL and VOLUME controls ( or VOLUME + / – on the remote control).

By pressing REC, you can record your voice if you want. (For more details, see pages 51 and 52.)

English

54

Image 57
Contents Consists of CA-UXA7DVD and SP-UXA7DVD UX-A7DVDUX-A7DVD Important for Laser Products Introduction PrecautionsContents Location of the Buttons and Controls Main UnitMain unit Display window Display window on the electronic swing panelSee pages in parentheses for details Remote ControlPlayable Disc Types About DiscsAbout audio formats Disc StructurePutting the Batteries into the Remote Control Connecting AntennasGetting Started UnpackingYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo remove the speaker grilles Connecting a TVTo select the color system Speaker grilles are removable as illustrated belowConnecting Other Equipment To connect analog audio equipment To stop and cancel the display demonstration manuallyTo select the On-screen language for the setting menu-Step Setting the DVD PlayerSelecting the output signal type Setting is finished On the remote control onlyGo to To select the monitor type on the next Press Choice while holding down ShiftPress Cursor ∞ repeatedly to move Press Cursor 3/2 to select the language you wantGo to To select the output signal type on the next To select the monitor type-StepGuidelines to select the monitor type Guidelines to select the output signal type To select the output signal type-StepPlayback Output signals DiscSetting the Clock To turn off the clock indication power save modeTo show the clock when the unit is turned on Basic and Common Operations Remote controlTo turn off the unit automatically Auto Power Off Turning On the PowerTo turn down the volume level temporarily Adjusting the VolumeSelecting the Sources and Starting Play To listen to the sound from external equipment, pressReinforcing the Bass Sound Adjusting the ToneTo select the illumination color Changing the Display IlluminationTo create your favorite colors To change the display brightnessOn the main unit only Adjusting the Audio Input Level Prohibiting Disc EjectionListening to FM and AM Broadcasts Remote controlSetting the AM Tuner Interval Spacing Tuning in to a StationTo change the FM reception mode Tuning in to a Preset Station Presetting StationsPress the number buttons to select a preset number Press SET againDVD Playing Back DiscsLoading a Disc On-screen guide iconsTo prevent screen burn-out with the screen saver DVD Basic Operations To go to another chapterTo show the on-screen indication To increase the DVD’s sound level SVCD/VCD/Audio CD Basic OperationsCurrent disc information Disc playing informationTo stop play for a moment, press DVD #¥8 or 8 on To go to another trackWhile playing a disc To erase the on-screen indication, press on ScreenAbout MP3 disc MP3 Basic OperationsUnavailable functions for MP3 disc Available for MP3To go to another group Searching for a Particular PointForward search Reverse searchPlaying Back by Using the Disc Menu When playing a DVDWhen playing a Svcd or VCD Repeating Playback PBC operation conceptRepeat play B repeat play On the remote control only Press Play Mode during playFor SVCD, VCD, or Audio CD Press Cursor 3/2 to move to A-B RepeatProgramming the Playing Order Program Play Press Play ModePress Cursor 3/2 to move to PROGRAM, then press Enter To program other titles, tracks, or groups, repeat stepTo check the programed contents To modify the programTo exit from the program play To exit from the random play Playing at Random-Random PlayPress Cursor 3/2 to move to RANDOM, then press Enter To skip the playing title, track, or group, press ¢Tape Playing Back TapesPlaying Back a Tape To play both sides-Reverse modeFunctions in this section do not work for MP3 discs Special Disc PlaybackPress Cursor 3/2 to move to Chap SEARCH, then press Enter To erase the on-screen indication, press Play ModeEnter a chapter number by pressing the number buttons 0 to Press Cursor 3/2 to move to Time SEARCH, then press EnterViewing the Desired Chapters/Tracks- Digest Selecting Multi-Angle Views To change angle viewsTo show all angle views Selecting the Subtitle Language Selecting the Audio Language or SoundPlaying Back in Slow-Motion-Slow Playing a Still Picture/Frame-by-FrameEnjoying Virtual Surround Sound Zooming in the Picture-ZoomYou can zoom a picture by 2 times To go back to normal play, press Zoom while holdingDVD Tape FM/AM AUX/MD RecordingBefore You Start Recording on a Tape To clean the heads, capstans, and pinch rollersTo protect your recordings To keep the best recording and playback sound qualityPrepare a disc Recording a Disc onto a Tape -Disc Synchronized RecordingPress REC on the main unit To stop recording, pressRecording Other Sources onto a Tape When you press REC while pausing a trackTo record a single track during play To record from external equipmentBass Using the MicrophoneIf howling or squealing feedback occurs while using To adjust the keySinging Along Karaoke To apply an echo to your voiceTOP Menu Changing the DVD Initial SettingsSetting menu Basic ProcedureChanging the Initial Language Settings Changing the Various Audio SettingsMore about Down MIX Changing the System Settings Changing the Display SettingsOn the System menu, you can change the following settings More about CompressionOn the remote control only Press Enter while holding down Setting the parental lockUnlocking the Parental Lock Temporarily Press Cursor 5/∞ to select YES, then pressDisplay Using the TimersHow the Recording Timer actually works Using the Recording TimerUsing the Daily Timer How the Daily Timer actually worksTo turn off the Recording Timer after its setting is done To turn off the Daily Timer after its setting is done Volume setting appears in the main displayTo turn on the Daily Timer again You can also use the source selecting buttonsHow the Sleep Timer actually works Using the Sleep TimerTimer Priority Press SleepSet AV Compulink Mode in the System menu as follows Using AV Compu Link Control SystemAV Compu Link Connection One-touch DVD playCleaning the unit MaintenanceGeneral Notes Handling discsSymptom TroubleshootingPossible Cause ActionDisc Tape Table of Language Codes Table of Country/Area Codes Zimbabwe Specifications EN, CS Victor Company of JAPAN, Limited 0303MWMMDWJEM