The total distance is shown on the lower line if the screen.
Programmable Odometer- The odometer digits are programmable. This is con-
FIGURE 19
venient for transferring your
Inclinometer (%GRD) The inclinometer will dis- play the percentage of grade you are climbing or descending in increments of 1%. A negative grade or descent is indicated by a negative sign (example
18
Tech note: The inclinometer calculates percentage of grade by comparing the change in altitude to the distance traveled. This data is updated on the LCD dis- play every 5 seconds and is based upon data accu- mulated during the previ- ous 20 seconds. It is nor- mal to experience a slight delay when transitioning from one grade to another.
Temperature (TEMP)
Your Turbo® Pro is contains a thermometer. Temperature is displayed in increments of one degree. While in “TEMP” mode, press the “SET” button to alternate between ˚C and ˚F.
Clock-
Your Turbo® Pro is equipped with a digital clock. The clock can be set to operate in either 12 or
Second Wheel Option- For riders who own more than one bicycle or who
frequently change tires, the Turbo® Pro is capable of storing two tire sizes. You can change between the two sizes by entering Distance Mode and select- ing TRIP. Then, press the “MODE” button for three seconds. The second wheel mode indicator will change from 1 to 2. Mileage recorded will be cumula- tive between the two sizes. (An accessory handlebar mount is available from your Specialized dealer.
Backlight-
The backlight feature of your Turbo® Elite is acti- vated by pressing the “TOP” button. The back- light will remain on for 5 seconds after the top but- ton is released. If you press any button while the backlight is on, the back- light will remain on for 5 seconds after the last but- ton is released. During the time the backlight is on, the
the display is not updated, the Turbo® Elite will con- tinue to monitor time and distance functions. If the computer is in
TROUBLESHOOTING: Display is blank: Change the battery or press the AC button on the bottom of the case Display shows
partial digits:
Press the AC button on the bottom of the case. Speed/distance
not recording:
Check sensor/magnet alignment. Make sure that the sensor is no more than 1/16” (2mm) from the magnet. Replace transmit- ter battery if necessary. Recalibrate Computer and transmitter.
Entire screen is dark: Did you leave the bike parked in the hot direct sun when it was parked? If so, move the bike to the shade. The data will be OK.
19