Specialized 23A manual Setting the Clock

Page 7

5. Setting the Clock

Your Turbo® Pro features a digital clock. To access the “clock mode” press and the “MODE” button repeat- edly until CLOCK appears in the Dot-matrix Display Area. To set the clock, press the “SET” button for three seconds. The display will flash either twelve (12:) or twenty four (24:). Select between 12: or 24: mode by pressing the “MODE” button. Press the “SET” but- ton to confirm your selec- tion. The hour digit will now begin flashing. Press the “MODE” button to adjust the hour digits. AM/PM is selected by scrolling the hour digit. Press the “SET” button to

FIGURE 14

accept the hour selection. The minutes will flash and can be adjusted by press- ing the “MODE” button.

(Hold the “MODE” button to scroll through the digits quickly) Press the “SET” button to set the minutes and return to clock mode

6. Timer Selection

The Turbo® Pro has two timers; Automatic Timer Mode (ATM) and Timer Mode (TIMER). The ATM selection allows you to keep track of your actual riding time. The ATM timer only operates when the wheel is rotating and can- not be turned on or off manually.

Note: The average speed (AVSPD) calculation is based upon the ATM time.

The TIMER function is just like a conventional stop- watch. The timer is activat- ed manually and records the time whether the wheel is rotating or not. Tapping the “TOP” button starts and stops the stopwatch and

when the timer is stopped, holding the “SET” button for three seconds will reset to stopwatch. The TIMER includes a 12-memory lap time feature. To record a lap time, press the “SET” button once while the stop- watch is running. Each time the “SET” button is depressed the Turbo® Pro will record the lap time. After the TIMER has been stopped (by pressing the “TOP” button) the previous twelve lap times can be reviewed by pressing “SET” button. Additionally, the computer will display the total time when LPTOT is shown. The backlight function is disabled when the timer is running.

7.Interval Timer (INT) Your Turbo® Pro is equipped with an Interval Timer. This feature allows you to customize your training by integrating a programmable repeating countdown timer into your workout. To enter the interval timer mode, press

the “MODE button” repeat- edly until “INT” appears Dot Matrix Display Area of the screen. You are now in interval timer mode. To set the interval timer, hold the “SET” button for three sec- onds. The hour digit will begin flashing. Press the “MODE” Button until the desired number appears. (Hold down the “Mode” button to scroll quickly) Press the “SET” button once to set this number and advance to minutes. Repeat

FIGURE 15

this process until minutes and seconds are set to the desired settings. Press the “SET” button to exit pro- gramming mode. Once the time interval timer is

12

13

Image 7
Contents Turbo PRO Cyclocomputer Timer Stopwatch With Lap-timer Mounting Turbo PRO Battery InstallationFigures 7, 8 OperationTire size on its LCD dis- play screen. See figure Roll Forward Stem Wheel Circumfrence Setting the Clock Distance Countdown Distú Altimeter CalibrationComputer Functions Trip Distance DST- Trip distance mode will Total distance is shown on the lower line if the screen Temperature TempBacklight Specifications Erwise