Specialized 23A manual Trip Distance DST- Trip distance mode will

Page 9

The resolution of the aver- age speed data on the Digital Display Area is shown in 0.1M/h or Km/h increments. (See figure 16)

the screen when (INT) appears on the left. The timer indicates the end of an interval with one short beep per second for the last 4 seconds of the interval. This is followed by a long beep, indicating the begin- ning of a new interval.

Trip Distance (DST)- Trip distance mode will

FIGURE 16

Maximum Speed (MXSPD)- The Maximum Speed is shown on the lower line of the Digital Display Area up to 99.9 M/h (99.9 Km/h) with a resolution of 0.1 M/h (0.1 Km/h) The maximum speed is retained in memory and updated when a higher speed is maintained for three seconds. The maximum speed can be reset by press- ing the “SET” button for three seconds. (See figure 17)

16

FIGURE 17

Auto Start/Stop Timer (ATM)-

In ATM mode the timer function records the actual time spent riding. It oper- ates only when there is speed input and is dis- played In the Digital Display Area of the screen

Timer Mode (TIMER)-

In TIMER mode the stop- watch function will operate when the “TOP” button is pressed. The stopwatch will record the total time after the button is pressed regardless of whether there is speed input or not.

Interval Timer (INT)- The interval timer is dis- played on the lower line of

Cadence (CAD)-

Cadence mode will display your pedaling speed in RPM’s (revolutions per minute) on the lower line of the screen. Monitoring how fast you turn your pedals can be used as a tool to enhance the effi- ciency with which you ride your bicycle. Simply put, the best cadence is a bal- ance between leg speed and pedal pressure. Beginning cyclists typically prefer to pedal at a slower cadence, around 60-rpm, while advanced cyclists and racers are more effi- cient between 90 and 100 rpm. Your Turbo® Pro can also display Average and Maximum Cadence.

FIGURE 18

record up to 999.99 miles or kilometers and then roll to zero. The trip distance can be reset by pressing the “SET” button for three seconds. The resolution is

0.01miles (0.01 Kilometers). The trip dis- tance is shown on the lower line if the screen. (See figure19)

Odometer (ODO)-

The odometer will record the total distance traveled up to 99,999 miles or kilo- meters and then roll to zero. The odometer can be reset by pressing the “SET” button for three seconds.

17

Image 9
Contents Turbo PRO Cyclocomputer Timer Stopwatch With Lap-timer Mounting Turbo PRO Battery InstallationFigures 7, 8 OperationTire size on its LCD dis- play screen. See figure Roll Forward Stem Wheel Circumfrence Setting the Clock Altimeter Calibration Distance Countdown DistúComputer Functions Trip Distance DST- Trip distance mode will Temperature Temp Total distance is shown on the lower line if the screenBacklight Specifications Erwise