JVC CA-NXCDR7R manual Recording from 3-CD Changer -CD Synchronized Recording, CD Direct Recording

Page 41

Continued

Recording from 3-CD Changer —CD Synchronized Recording

You have three methods to record from 3-CD Changer to CD Recorder.

Using these synchronized recording methods, you can start and playback and recording at the same time.

CD Direct Recording—Records a disc in 3-CD Changer (or the program you have made)—with or without finalization (see page 33).

First Track Recording—Records the first track of each disc in 3-CD Changer.

Listening Edit Recording—Records only tracks you select while playing back discs in 3-CDChanger—with or without finalization (see page 33).

Before starting any of the above recording, adjust the recording input level if necessary.

See “To adjust the recording input level” on page 35.

CD Direct Recording

CD Direct Recording allows you to easily record a disc in 3-CD Changer onto a CD-R or CD-RW in CD Recorder.

Using the DIRECT REC button

On the unit ONLY:

1 Prepare discs in 3-CD Changer.

If the current playing source is not 3-CD changer, press CD 3/ 8, then 7. To select a disc, press DISC repeatedly, then 7.

You can also use the remote control. When using it, press CD1, CD2, or CD3, then 7.

You can make a program (see page 25) if you want. (But you cannot select Random Play.)

2 Insert a recordable CD-R or CD-RW on the CDR disc tray.

3 Press REC SPEED (inside the sliding panel) if necessary.

• Each time you press the button, recording speed alternates between normal speed and high speed*.

 

AUTO TRACK

 

 

 

AUTO TRACK

 

 

 

NORMAL

 

 

 

 

 

 

 

SPEED

CD-RW

 

 

HIGH SPEED

CD-RW

 

 

 

 

 

 

 

REC LEVEL dB

UNFINALIZE DISC

 

REC LEVEL dB

UNFINALIZE DISC

 

 

 

 

 

 

 

 

 

*For CD-R, 4 times normal speed; for CD-RW, 2 times normal speed.

When high speed is selected, recording input level is reset to “0” temporarily, and will not affect the recording.

4 Press DIRECT REC.

CD

 

 

AUTO TRACK

 

 

 

 

 

NORMAL

 

 

1 2 3

 

 

SPEED

CD-RW

 

 

 

 

 

 

 

 

REC LEVEL dB

UNFINALIZE DISC

 

 

 

 

 

 

 

If OPC (see page 32) is being performed, “UPDATE OPC” flashes first in the main display, then recording starts.

 

 

CD

AUTO TRACK

 

 

 

 

NORMAL

 

1

2

3

SPEED

CD-RW

 

 

 

 

REC LEVEL

REC UNFINALIZE DISC

Remaining time of the

Remaining time in the

currently playing track

CD-R/CD-RW

Recording stops when a selected disc (or a program) is recorded.

Both 3-CD Changer and CD Recorder stop automatically.

To confirm the recording contents, see “To change the display information while recording” on page 35.

To stop recording, press 7. “STOP DUBBING” flashes for a while.

Both 3-CD Changer and CD Recorder stop automatically.

To remove the recorded disc, press 0CDR. “FINALIZE ?” flashes in the main display for a while.

If you do finalize the disc, press FINALIZE. Remember once you finalize a CD-R, no further recording can be made on the disc. (For more details, see “Finalizing a Disc—CD-R/CD-RW” on page 41.)

If you do not finalize the disc, press 0 CDR again.

If “SHORT REM. OK ?” appears when you press

DIRECT REC

There is not enough remaining time left on the recordable disc. Eject and change a disc or press DIRECT REC one more time to start recording anyway (the entire source disc cannot be recorded in this case).

If you press DIRECT REC while listening to any other source than 3-CD Changer (and CD Recorder)

Recording will also start if a recordable disc is on the CDR disc tray. However, recording will not stop until you press 7.

During CD Direct Recording

Repeat Play will be canceled automatically.

– 36 –

Image 41
Contents CA-NXCDR7R If in Doubt Consult a Competent Electrician Front view Class Laser Product Above ALL Contents Introduction PrecautionsRecording Precautions on Disc Playback and RecordingImportant notice Following discs cannot be used for recordingLocation of the Buttons and Controls Remote ControlRemote Control Press OPEN/CLOSE e to move down or up the sliding panel Main UnitDisplay Window Display WindowMain Unit Daily 9 REC 0 Sleep Timer mode indicators 48Getting Started Connecting AntennasUnpacking FM antennaYou can connect the speakers using the speaker cords Connecting SpeakersAM MW/LW antenna To connect an outdoor AM MW/LW antennaTo connect digital components Connecting Other ComponentsTo connect an analog component such as a cassette deck Protective cap Remote sensor Putting the Batteries into the Remote ControlPress OPEN/CLOSE to move down or up the sliding panel Basic and Common OperationsSaving the Power Consumption while On Standby Turning On the PowerTo adjust the input level through the Line in jacks Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeChanging the Display Information To check the sound mode currently selected, press To use your own sound modeSelecting the Sound Modes Creating Your Own Sound Modes -MANUAL ModesListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning into a StationPresetting Stations Receiving FM Stations with RDS Tuning into a Preset StationSearching for Programs by PTY Codes PTY Search Changing the RDS InformationPress PTY Search again To continue searching after the first stopTo activate the EON function, follow the procedure below Switching to a Program of Your Choice AutomaticallyTA News Info TA+News TA+News+Info News+Info TA+Info Unit continues to receive the stationDescription of the PTY codes Alarm function10+10 Playing Back Discs on 3-CD ChangerPlaying Back the Entire Discs-Continuous Play Loading DiscsDisc tray closes You can play discs continuouslyBasic Disc Operations To go to another track directly using the number buttonsPrograming the Playing Order of the Tracks -Program Play To start playing a disc during playback of another discTo modify the program To check the program contentsPlaying at Random-Random Play Other Convenient Functions To select the Continuous Play mode for 3-CD ChangerCD1 Play ? CD2 Play ?On the remote control only Press Pitch during play To adjust the playback speedTo cancel the prohibition and unlock the discs To prohibit disc ejection-Disc LockCDR Playing Back a Disc on CD RecorderPlaying Back a Disc-Normal Play On the remote control only Press 0CDRRepeating Tracks-Repeat Play To locate a particular point in a track during playREC Level Recording on a CD-R/CD-RWBefore You Start Recording Optimum Power Control OPCSampling frequency rate converter Auto track spaceFinalization Available recording modes-REC ModeHigh-Speed Recording To fade in and fade out the recording Recording Any Sound Source Standard RecordingWhen the source is 3-CD Changer To adjust the recording input levelWhen the source is other than 3-CD Changer To make a silent portion in your recordingRecording from 3-CD Changer -CD Synchronized Recording Using the Direct REC buttonCD Direct Recording On the unit only Prepare discs in 3-CD ChangerCD REC ? Select this to perform CD Direct Recording Using the REC Mode buttonCD REC? = 1st Tr. REC? = SET=LISTENING? = During First Track Recording Using the REC Mode button onlyFirst Track Recording Repeat to program other tracks Listening Edit RecordingTo stop during editing process and start recording, press During Listening Edit RecordingREC indicator flashes on the display for a while Sound SYNC. REC? CanceledRecording starts automatically when the sound signals come Start playback on the selected external componentFinalizing a Disc-CD-R/CD-RW Recording a Single Track during Play1Tr. REC ? Press FinalizeMenu Other Convenient CDR FunctionsSetting for auto-track marking appears Converter =Canceled =back to the beginningAuto Track indicator lights on the display Recording Track Marks Manually -Manual Track-MarkingCurrent setting for Converter appears Current setting for Track Space appearsTurning On or Off Sampling Frequency Rate Converter Separating Recorded Tracks Automatically-Auto-Track SpacePress ¢or 4 to select the erasure start track Erasing Tracks Only for CD-RWPress Enter DisplayUnfinalizing a Disc Only for CD-RW Erasing All Tracks Only for CD-RWYou can erase all the recorded tracks on a CD-RWat a time Confirmation message appearsUsing the Timers Using Recording Timer Setting the ClockTo adjust the clock again How Recording Timer actually worksTo turn on the Recording Timer, press SET To turn on or off Recording Timer after its setting is doneFM AM Line If you have selected FM or AM as the sourceHow Daily Timer actually works Using Daily TimerCD CDR Line AM FMDaily Daily Timer indicator stops flashing and remains lit Press ¡/ ¢or 4/ 1to adjust the volume level, then press SETTo turn off the Daily Timer, press Cancel to select To turn on the Daily Timer, press SETHow Sleep Timer actually works Using Sleep TimerUsing Auto Power Off Maintenance Glossary Messages Change the position and direction TroubleshootingFM tuning range MHz 108.00 MHz AM MW/LW tuning range SpecificationsAmplifier TunerDimensions approx Mm x 210 mm x 349 mm Mass approx Supplied accessoriesCD player CD RecorderJVC 0701MWMMDWJEM

CA-NXCDR7R, LVT0749-003A specifications

The JVC LVT0749-003A CA-NXCDR7R is a versatile audio playback device that offers exceptional sound quality and a host of features specifically designed for music enthusiasts. This compact stereo system combines a sleek design with cutting-edge technology, making it a suitable addition to any home or office environment.

One of the standout features of the CA-NXCDR7R is its CD player that supports various formats, including CD-Rs and CD-RWs. This functionality allows users to enjoy their favorite music, whether it's stored on commercially released CDs or custom-made discs filled with personal playlists. Additionally, the system supports MP3 playback, which means users can listen to audio files that have been compressed to conserve storage space, all while maintaining impressive sound quality.

Equipped with an FM/AM tuner, the JVC CA-NXCDR7R provides access to a wide range of radio stations. The tuner is designed for easy channel scanning, ensuring that users can quickly find their preferred radio broadcasts. The system also features a built-in digital clock with a sleep timer, perfect for individuals who enjoy falling asleep to music.

The JVC CA-NXCDR7R incorporates an auxiliary input, allowing users to connect external devices such as smartphones, tablets, or laptops seamlessly. This expands playback options, enabling users to listen to their favorite streaming services, podcasts, or audio files from various sources. The system also has speaker output terminals, which allow for the connection of external speakers for those who desire improved audio performance.

Another innovative feature of the CA-NXCDR7R is its remote control, offering convenience and ease of use. Users can adjust volume levels, switch tracks, and change settings from a distance, making it a user-friendly option for anyone who wants to enjoy music without having to constantly get up.

Overall, the JVC LVT0749-003A CA-NXCDR7R is a modern audio system that combines high-quality sound with practical features. Its student-friendly design and multiple playback options cater to a wide audience, reinforcing JVC's commitment to delivering exceptional audio experiences in an accessible package.