JVC CA-NXCDR7R, LVT0749-003A manual First Track Recording, Using the REC Mode button only

Continued

First Track Recording

First Track Recording allows you to record the first track of each loaded disc in 3-CD Changer.

You can, for example, make a directory of all your best CDs.

■Using the REC MODE button ONLY

On the unit ONLY:

1 Prepare discs in 3-CD Changer.

•If the current playing source is not 3-CD changer, press CD 3/ 8, then 7. To select a disc, press DISC repeatedly, then 7.

You can also use the remote control. When using it, press CD1, CD2, or CD3, then 7.

•If the current play mode is either Program Play or Random Play, press FM/PLAY MODE on the remote control to select Continuous Play.

2 Insert a recordable CD-R or CD-RW on the CDR disc tray.

3 Press REC SPEED (inside the sliding panel) if necessary.

•Each time you press the button, recording speed alternates between normal speed and high speed*.

AUTO TRACK		AUTO TRACK
NORMAL		HIGH SPEED
SPEED	CD-RW		CD-RW
REC LEVEL dB	UNFINALIZE DISC	REC LEVEL dB	UNFINALIZE DISC

*For CD-R, 4 times normal speed; for CD-RW, 2 times normal speed.

When high speed is selected, recording input level is reset to “0” temporarily, and will not affect the recording.

4 Press REC MODE (inside the sliding panel) to select “1st Tr. REC?”

• Each time you press the button, recording modes change as follows:

CD	AUTO TRACK
	NORMAL
1 2 3	SPEED	CD-RW
	REC LEVEL dB	UNFINALIZE DISC

CD REC? = 1st Tr. REC? = SET=LISTENING? =

CD REC & FINALIZE? =SET=LISTENING & FINALIZE? = Canceled =(Goes back to the beginning)

5 Press REC START (inside the sliding panel) .

•If OPC (see page 32) is being performed, “UPDATE OPC” flashes first in the main display, then recording starts.

		CD	AUTO TRACK
			NORMAL
1	2	3	SPEED	CD-RW
			REC LEVEL	REC UNFINALIZE DISC

Remaining time of the	Remaining time in the
currently playing track	CD-R/CD-RW

After the first track of the disc on the CD1 tray is recorded, the first track of the CD on the CD2 tray will be recorded. (If no disc is on the CD tray, it will be skipped.)

After the first tracks of all loaded discs are recorded, First Track Recording stops.

6 Repeat steps 1, 4, and 5 to continuously record more tracks using First Track Recording.

To confirm the recording contents, see “To change the display information while recording” on page 35.

To stop recording, press 7. “STOP DUBBING” flashes for a while.

•Both 3-CD Changer and CD Recorder stop automatically.

To remove the recorded disc, press 0CDR. “FINALIZE ?” flashes in the main display for a while.

•If you do finalize the disc, press FINALIZE. Remember once you finalize a CD-R, no further recording can be made on the disc. (For more details, see “Finalizing a Disc—CD-R/CD-RW” on page 41.)

•If you do not finalize the disc, press 0 CDR again.

If “SHORT REM. OK ?” appears when you press

REC START

There is not enough remaining time left on the recordable disc. Eject and change a disc or press REC START one more time to start recording anyway (the entire track cannot be recorded in this case).

During First Track Recording

Repeat Play will be canceled automatically.

– 38 –