JVC CA-NXCDR7R manual Erasing All Tracks Only for CD-RW, Unfinalizing a Disc Only for CD-RW

Page 51

Erasing All Tracks (Only for CD-RW)

You can erase all the recorded tracks on a CD-RWat a time.

Before you start....

•Once erasure is performed, erased data cannot be restored.

•If you unplug the power cord or if a power failure occurs while “ERASE DISC” is flashing in the main display (in step 3), the disc may not be utilized any more.

On the remote control ONLY:

1 Press MENU repeatedly until “DISC ERASE” appears in the main display.

•Each time you press the button, the following menu items appear as follows:

TRACK ERASE = DISC ERASE = UNFINALIZE = TRACK SKIP = AUTO TRACK = TRACK SPACE =

CONVERTER =Canceled =(back to the beginning)

2 Press SET.

The confirmation message appears.

 

 

 

 

CDR

1 2 3

 

 

 

CD-RW

UNFINALIZE DISC

3 Press ENTER.

While erasure is performed (for about 90 seconds), “ERASE DISC” flashes in the main display. (The REC indicator also lights on the display.)

 

 

 

 

 

 

CDR

1

2

3

 

 

 

CD-RW

 

 

 

 

 

 

REC UNFINALIZE DISC

 

 

 

CD

 

AUTO TRACK

CDR

 

 

 

DAILY

RANDOM

NORMAL

 

 

 

 

HIGH SPEED

 

1

2

3

ALL SKIP ON

CD-RW

TEXT

 

 

 

 

 

RDS

 

 

Unfinalizing a Disc (Only for CD-RW)

By erasing the TOC (Table of Contents) of a finalized CD- RW, you will be able to record on the CD-RW again.

This erasing process of the TOC is called “Unfinalization.”

•Unfinalization is just to erase the TOC only, but not the recorded music signals on the disc.

IMPORTANT

If you unplug the power cord or if a power failure occurs while “UNFINALIZE” is flashing in the main display (in step 3), the disc may not be utilized any more.

On the remote control ONLY:

1 Press MENU repeatedly until “UNFINALIZE” appears in the main display.

•Each time you press the button, the following menu items appear as follows:

TRACK ERASE = DISC ERASE = UNFINALIZE = TRACK SKIP = AUTO TRACK = TRACK SPACE =

CONVERTER =Canceled =(back to the beginning)

2 Press SET.

The confirmation message appears.

 

 

 

 

CDR

 

1 2 3

 

 

 

CD-RW

 

 

 

 

 

 

 

3 Press ENTER.

While erasure is performed (for about 90 seconds), “UNFINALIZE” flashes in the main display.

 

 

 

CDR

1

2

3

CD-RW

 

 

 

REC

– 46 –

Page 50 Page 52
Image 51
Page 50 Page 52
Contents CA-NXCDR7R If in Doubt Consult a Competent Electrician Front view Class Laser Product Above ALL Contents Introduction PrecautionsFollowing discs cannot be used for recording Precautions on Disc Playback and RecordingRecording Important noticeRemote Control Remote ControlLocation of the Buttons and Controls Press OPEN/CLOSE e to move down or up the sliding panel Main UnitDisplay Window Main UnitDisplay Window Daily 9 REC 0 Sleep Timer mode indicators 48FM antenna Connecting AntennasGetting Started UnpackingTo connect an outdoor AM MW/LW antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM MW/LW antennaConnecting Other Components To connect an analog component such as a cassette deckTo connect digital components Protective cap Remote sensor Putting the Batteries into the Remote ControlPress OPEN/CLOSE to move down or up the sliding panel Basic and Common OperationsSelecting the Sources and Starting Play Turning On the PowerSaving the Power Consumption while On Standby To adjust the input level through the Line in jacksAdjusting the Volume Changing the Display InformationReinforcing the Bass Sound Creating Your Own Sound Modes -MANUAL Modes To use your own sound modeTo check the sound mode currently selected, press Selecting the Sound ModesListening to FM and AM MW/LW Broadcasts Tuning into a Station Presetting StationsTo change the FM reception mode Receiving FM Stations with RDS Tuning into a Preset StationTo continue searching after the first stop Changing the RDS InformationSearching for Programs by PTY Codes PTY Search Press PTY Search againUnit continues to receive the station Switching to a Program of Your Choice AutomaticallyTo activate the EON function, follow the procedure below TA News Info TA+News TA+News+Info News+Info TA+InfoDescription of the PTY codes Alarm function10+10 Playing Back Discs on 3-CD ChangerYou can play discs continuously Loading DiscsPlaying Back the Entire Discs-Continuous Play Disc tray closesTo start playing a disc during playback of another disc To go to another track directly using the number buttonsBasic Disc Operations Programing the Playing Order of the Tracks -Program PlayTo check the program contents Playing at Random-Random PlayTo modify the program CD2 Play ? To select the Continuous Play mode for 3-CD ChangerOther Convenient Functions CD1 Play ?To prohibit disc ejection-Disc Lock To adjust the playback speedOn the remote control only Press Pitch during play To cancel the prohibition and unlock the discsCDR Playing Back a Disc on CD RecorderTo locate a particular point in a track during play On the remote control only Press 0CDRPlaying Back a Disc-Normal Play Repeating Tracks-Repeat PlayREC Level Recording on a CD-R/CD-RWAuto track space Optimum Power Control OPCBefore You Start Recording Sampling frequency rate converterAvailable recording modes-REC Mode High-Speed RecordingFinalization To fade in and fade out the recording Recording Any Sound Source Standard RecordingTo make a silent portion in your recording To adjust the recording input levelWhen the source is 3-CD Changer When the source is other than 3-CD ChangerOn the unit only Prepare discs in 3-CD Changer Using the Direct REC buttonRecording from 3-CD Changer -CD Synchronized Recording CD Direct RecordingUsing the REC Mode button CD REC? = 1st Tr. REC? = SET=LISTENING? =CD REC ? Select this to perform CD Direct Recording Using the REC Mode button only First Track RecordingDuring First Track Recording During Listening Edit Recording Listening Edit RecordingRepeat to program other tracks To stop during editing process and start recording, pressStart playback on the selected external component Sound SYNC. REC? CanceledREC indicator flashes on the display for a while Recording starts automatically when the sound signals comePress Finalize Recording a Single Track during PlayFinalizing a Disc-CD-R/CD-RW 1Tr. REC ?Menu Other Convenient CDR FunctionsRecording Track Marks Manually -Manual Track-Marking Converter =Canceled =back to the beginningSetting for auto-track marking appears Auto Track indicator lights on the displaySeparating Recorded Tracks Automatically-Auto-Track Space Current setting for Track Space appearsCurrent setting for Converter appears Turning On or Off Sampling Frequency Rate ConverterDisplay Erasing Tracks Only for CD-RWPress ¢or 4 to select the erasure start track Press EnterConfirmation message appears Erasing All Tracks Only for CD-RWUnfinalizing a Disc Only for CD-RW You can erase all the recorded tracks on a CD-RWat a timeUsing the Timers How Recording Timer actually works Setting the ClockUsing Recording Timer To adjust the clock againIf you have selected FM or AM as the source To turn on or off Recording Timer after its setting is doneTo turn on the Recording Timer, press SET FM AM LineAM FM Using Daily TimerHow Daily Timer actually works CD CDR LineTo turn on the Daily Timer, press SET Press ¡/ ¢or 4/ 1to adjust the volume level, then press SETDaily Daily Timer indicator stops flashing and remains lit To turn off the Daily Timer, press Cancel to selectUsing Sleep Timer Using Auto Power OffHow Sleep Timer actually works Maintenance Glossary Messages Change the position and direction TroubleshootingTuner SpecificationsFM tuning range MHz 108.00 MHz AM MW/LW tuning range AmplifierCD Recorder Supplied accessoriesDimensions approx Mm x 210 mm x 349 mm Mass approx CD playerJVC 0701MWMMDWJEM

CA-NXCDR7R, LVT0749-003A specifications

The JVC LVT0749-003A CA-NXCDR7R is a versatile audio playback device that offers exceptional sound quality and a host of features specifically designed for music enthusiasts. This compact stereo system combines a sleek design with cutting-edge technology, making it a suitable addition to any home or office environment.

One of the standout features of the CA-NXCDR7R is its CD player that supports various formats, including CD-Rs and CD-RWs. This functionality allows users to enjoy their favorite music, whether it's stored on commercially released CDs or custom-made discs filled with personal playlists. Additionally, the system supports MP3 playback, which means users can listen to audio files that have been compressed to conserve storage space, all while maintaining impressive sound quality.

Equipped with an FM/AM tuner, the JVC CA-NXCDR7R provides access to a wide range of radio stations. The tuner is designed for easy channel scanning, ensuring that users can quickly find their preferred radio broadcasts. The system also features a built-in digital clock with a sleep timer, perfect for individuals who enjoy falling asleep to music.

The JVC CA-NXCDR7R incorporates an auxiliary input, allowing users to connect external devices such as smartphones, tablets, or laptops seamlessly. This expands playback options, enabling users to listen to their favorite streaming services, podcasts, or audio files from various sources. The system also has speaker output terminals, which allow for the connection of external speakers for those who desire improved audio performance.

Another innovative feature of the CA-NXCDR7R is its remote control, offering convenience and ease of use. Users can adjust volume levels, switch tracks, and change settings from a distance, making it a user-friendly option for anyone who wants to enjoy music without having to constantly get up.

Overall, the JVC LVT0749-003A CA-NXCDR7R is a modern audio system that combines high-quality sound with practical features. Its student-friendly design and multiple playback options cater to a wide audience, reinforcing JVC's commitment to delivering exceptional audio experiences in an accessible package.
Top Page Image Contents