JVC CA-NXCDR7R, LVT0749-003A manual Above ALL

Page 5

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and with- draw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unat- tended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this.

Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock.

— NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

– G-4 –

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CA-NXCDR7R If in Doubt Consult a Competent Electrician Front view Class Laser Product Above ALL Contents Introduction PrecautionsRecording Precautions on Disc Playback and RecordingImportant notice Following discs cannot be used for recordingLocation of the Buttons and Controls Remote ControlRemote Control Press OPEN/CLOSE e to move down or up the sliding panel Main UnitDisplay Window Display WindowMain Unit Daily 9 REC 0 Sleep Timer mode indicators 48Getting Started Connecting AntennasUnpacking FM antennaYou can connect the speakers using the speaker cords Connecting SpeakersAM MW/LW antenna To connect an outdoor AM MW/LW antennaTo connect digital components Connecting Other ComponentsTo connect an analog component such as a cassette deck Protective cap Remote sensor Putting the Batteries into the Remote ControlPress OPEN/CLOSE to move down or up the sliding panel Basic and Common OperationsSaving the Power Consumption while On Standby Turning On the PowerTo adjust the input level through the Line in jacks Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeChanging the Display Information To check the sound mode currently selected, press To use your own sound modeSelecting the Sound Modes Creating Your Own Sound Modes -MANUAL ModesListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning into a StationPresetting Stations Receiving FM Stations with RDS Tuning into a Preset StationSearching for Programs by PTY Codes PTY Search Changing the RDS InformationPress PTY Search again To continue searching after the first stopTo activate the EON function, follow the procedure below Switching to a Program of Your Choice AutomaticallyTA News Info TA+News TA+News+Info News+Info TA+Info Unit continues to receive the stationDescription of the PTY codes Alarm function10+10 Playing Back Discs on 3-CD ChangerPlaying Back the Entire Discs-Continuous Play Loading DiscsDisc tray closes You can play discs continuouslyBasic Disc Operations To go to another track directly using the number buttonsPrograming the Playing Order of the Tracks -Program Play To start playing a disc during playback of another discTo modify the program To check the program contentsPlaying at Random-Random Play Other Convenient Functions To select the Continuous Play mode for 3-CD ChangerCD1 Play ? CD2 Play ?On the remote control only Press Pitch during play To adjust the playback speedTo cancel the prohibition and unlock the discs To prohibit disc ejection-Disc LockCDR Playing Back a Disc on CD RecorderPlaying Back a Disc-Normal Play On the remote control only Press 0CDRRepeating Tracks-Repeat Play To locate a particular point in a track during playREC Level Recording on a CD-R/CD-RWBefore You Start Recording Optimum Power Control OPCSampling frequency rate converter Auto track spaceFinalization Available recording modes-REC ModeHigh-Speed Recording To fade in and fade out the recording Recording Any Sound Source Standard RecordingWhen the source is 3-CD Changer To adjust the recording input levelWhen the source is other than 3-CD Changer To make a silent portion in your recordingRecording from 3-CD Changer -CD Synchronized Recording Using the Direct REC buttonCD Direct Recording On the unit only Prepare discs in 3-CD ChangerCD REC ? Select this to perform CD Direct Recording Using the REC Mode buttonCD REC? = 1st Tr. REC? = SET=LISTENING? = During First Track Recording Using the REC Mode button onlyFirst Track Recording Repeat to program other tracks Listening Edit RecordingTo stop during editing process and start recording, press During Listening Edit RecordingREC indicator flashes on the display for a while Sound SYNC. REC? CanceledRecording starts automatically when the sound signals come Start playback on the selected external componentFinalizing a Disc-CD-R/CD-RW Recording a Single Track during Play1Tr. REC ? Press FinalizeMenu Other Convenient CDR FunctionsSetting for auto-track marking appears Converter =Canceled =back to the beginningAuto Track indicator lights on the display Recording Track Marks Manually -Manual Track-MarkingCurrent setting for Converter appears Current setting for Track Space appearsTurning On or Off Sampling Frequency Rate Converter Separating Recorded Tracks Automatically-Auto-Track SpacePress ¢or 4 to select the erasure start track Erasing Tracks Only for CD-RWPress Enter DisplayUnfinalizing a Disc Only for CD-RW Erasing All Tracks Only for CD-RWYou can erase all the recorded tracks on a CD-RWat a time Confirmation message appearsUsing the Timers Using Recording Timer Setting the ClockTo adjust the clock again How Recording Timer actually worksTo turn on the Recording Timer, press SET To turn on or off Recording Timer after its setting is doneFM AM Line If you have selected FM or AM as the sourceHow Daily Timer actually works Using Daily TimerCD CDR Line AM FMDaily Daily Timer indicator stops flashing and remains lit Press ¡/ ¢or 4/ 1to adjust the volume level, then press SETTo turn off the Daily Timer, press Cancel to select To turn on the Daily Timer, press SETHow Sleep Timer actually works Using Sleep TimerUsing Auto Power Off Maintenance Glossary Messages Change the position and direction TroubleshootingFM tuning range MHz 108.00 MHz AM MW/LW tuning range SpecificationsAmplifier TunerDimensions approx Mm x 210 mm x 349 mm Mass approx Supplied accessoriesCD player CD RecorderJVC 0701MWMMDWJEM

CA-NXCDR7R, LVT0749-003A specifications

The JVC LVT0749-003A CA-NXCDR7R is a versatile audio playback device that offers exceptional sound quality and a host of features specifically designed for music enthusiasts. This compact stereo system combines a sleek design with cutting-edge technology, making it a suitable addition to any home or office environment.

One of the standout features of the CA-NXCDR7R is its CD player that supports various formats, including CD-Rs and CD-RWs. This functionality allows users to enjoy their favorite music, whether it's stored on commercially released CDs or custom-made discs filled with personal playlists. Additionally, the system supports MP3 playback, which means users can listen to audio files that have been compressed to conserve storage space, all while maintaining impressive sound quality.

Equipped with an FM/AM tuner, the JVC CA-NXCDR7R provides access to a wide range of radio stations. The tuner is designed for easy channel scanning, ensuring that users can quickly find their preferred radio broadcasts. The system also features a built-in digital clock with a sleep timer, perfect for individuals who enjoy falling asleep to music.

The JVC CA-NXCDR7R incorporates an auxiliary input, allowing users to connect external devices such as smartphones, tablets, or laptops seamlessly. This expands playback options, enabling users to listen to their favorite streaming services, podcasts, or audio files from various sources. The system also has speaker output terminals, which allow for the connection of external speakers for those who desire improved audio performance.

Another innovative feature of the CA-NXCDR7R is its remote control, offering convenience and ease of use. Users can adjust volume levels, switch tracks, and change settings from a distance, making it a user-friendly option for anyone who wants to enjoy music without having to constantly get up.

Overall, the JVC LVT0749-003A CA-NXCDR7R is a modern audio system that combines high-quality sound with practical features. Its student-friendly design and multiple playback options cater to a wide audience, reinforcing JVC's commitment to delivering exceptional audio experiences in an accessible package.
Top Page Image Contents