Huffy In-Ground Basketball manual Wood Scrap Not supplied

Page 10

4. Bounce top and middle pole assembly (4 and 5) onto bottom pole section (6) using a wood scrap as shown. Bounce until the top and middle pole assembly no longer moves toward the pole identification mark on the bottom pole.

IMPORTANT!

NOTE ORIENTATION.

4

5

6

Wood Scrap

(not supplied)

Attach pole assembly to tank (1) as shown.

5. Secure pole assembly to tank using bolts (25) and pole mounting plate (19) as shown.

WARNING!

TWO CAPABLE ADULTS

REQUIRED FOR THIS

PROCEDURE. FAILURE TO

FOLLOW THIS WARNING COULD

RESULT IN SERIOUS INJURY

AND/OR PROPERTY DAMAGE.

6

19

25

ID# M6809011

12/06

10

Image 10
Contents Portable System Before YOU Start Safety Instructions Get to know the basic parts of your basketball system Parts List See Hardware Identifier Hardware Identifier Bolts & Screws #30 #36 #13 Fig. a Poles Wood Scrap Not supplied Do not Tighten Struts Must be attached to Base through Larger holes Completed Assembly Section B Attach the Backboard Carefully cut Install Slam Jam Rim to Backboard 12/06 ID# M6809011 ID# M6809011 12/06 If Using Sand 2 Gallons of ANTI-FREEZE is not Required Handle 21 can be removed and stored by removing pin