Huffy In-Ground Basketball manual Install Slam Jam Rim to Backboard

Page 16

3.

A

34

Install Slam Jam Rim to Backboard

A.Fit rim (34) securely into bracket (44) as shown. Allow T-bolt (45) to slip through center hole in rim (34).

B.Install reinforcement bracket (46) onto T-bolt (45) as shown.

C.Install spring (47) onto T-bolt (45) as shown.

D. Install special nut (48) and washer (37) onto T-bolt (45).

NOTE:

E. Tighten nut (48) until flush with end of T-bolt (45).

46

ORIENTATION

OF BRACKET

B

46

45

45

44

48 37

C

47

45

E

D

45 37

48

ID# M6809011

12/06

16

Image 16
Contents Portable System Before YOU Start Safety Instructions Get to know the basic parts of your basketball system Parts List See Hardware Identifier Hardware Identifier Bolts & Screws #30 #36 #13 Fig. a Poles Wood Scrap Not supplied Do not Tighten Struts Must be attached to Base through Larger holes Completed Assembly Section B Attach the Backboard Carefully cut Install Slam Jam Rim to Backboard 12/06 ID# M6809011 ID# M6809011 12/06 If Using Sand 2 Gallons of ANTI-FREEZE is not Required Handle 21 can be removed and stored by removing pin