Huffy In-Ground Basketball manual Fig. a

Page 8

SECTION A: ASSEMBLE THE BASE

This is what your system will look like when you’ve finished this section.

TOOLS REQUIRED FOR THIS SECTION

(2) Wrenches

9/16”, 1/2”

AND/OR

(2) Socket Wrenches and Sockets

Sawhorse or support table

1/2” 9/16”

Extension

Complete wheel assembly as shown in Figure A. Secure wheel bracket (7) and wheel assembly (Fig. A.)

1. to the tank (1) with a bolts (18) and washers (24). Repeat procedure for opposite wheel.

Fig. A.

Wood Block

NOTE:

TO INSTALL SECOND PUSHNUT:

Assemble Pushnut, Wheels, Axle, And Wheel Bracket As Shown.

Support Pushnut/Axle From The End With A Block Of Wood To Install The Second Pushnut Onto The Axle.

18

24

18

24

13

7

1

18

24

18

24

7

9

13

8

8

ID# M6809011

12/06

8

Image 8
Contents Portable System Before YOU Start Safety Instructions Get to know the basic parts of your basketball system Parts List See Hardware Identifier Hardware Identifier Bolts & Screws #30 #36 #13 Fig. a Poles Wood Scrap Not supplied Do not Tighten Struts Must be attached to Base through Larger holes Completed Assembly Section B Attach the Backboard Carefully cut Install Slam Jam Rim to Backboard 12/06 ID# M6809011 ID# M6809011 12/06 If Using Sand 2 Gallons of ANTI-FREEZE is not Required Handle 21 can be removed and stored by removing pin