Huffy In-Ground Basketball manual Handle 21 can be removed and stored by removing pin

Page 20

7.

A.

Install net (43).

34

B.

43

C.

43

D.

34

8. Apply Height Adjustment and Moving Label (33) to front of pole, where it is clearly visible.

CAUTION!

 

 

DO NOT OVER-CRANK HANDLE

 

 

BEYOND THE MANUFACTURED

 

 

HEIGHT-INDICATOR RANGE OF

 

A

7-1/2 - 10 FEET. DAMAGE MAY

 

BE CAUSED TO THE SCREW

 

 

B

 

JACK’S INTERNAL

 

ADJUSTMENT MECHANISM IF

 

 

ADJUSTED OVER 10 OR UNDER

 

 

7-1/2 FEET.

 

 

HEIGHT AND MOVING LABEL

HEIGHT

ADJUSTMENT

Rotate crank handle to raise and lower backboard.

Do not over crank

 

handle beyond the

 

manufactured height

 

indicator range of

A

7-1/2 - 10 feet.

 

Damage may be

 

caused to the screw

B

jack’s internal

adjustment

 

mechanism if

 

adjusted over 10 or

 

under 7-1/2 feet.

 

MOVING SYSTEM

1. While holding pole, rotate basketball sytem forward until wheels engage with ground.

2. Move basketball system to desired location.

3. Carefully rotate basketball system upright.

4. Check system for stability.

33

1

2

3

568090 11/06

MUST NOT OBSTRUCT

FACTORY ATTACHED WARNING

LABEL.

22

21

NOTE:

Handle (21) can be removed and stored by removing pin (22).

RIM COVER ATTACHMENT

9.

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE:

 

 

 

 

 

 

34

 

 

 

 

 

Cover plate (28) will fit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INSIDE back bracket.

 

 

 

 

 

 

39

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

39

28

ID# M6809011

12/06

20

Image 20
Contents Portable System Before YOU Start Safety Instructions Get to know the basic parts of your basketball system Parts List See Hardware Identifier Hardware Identifier Bolts & Screws #30 #36 #13 Fig. a Poles Wood Scrap Not supplied Do not Tighten Struts Must be attached to Base through Larger holes Completed Assembly Section B Attach the Backboard Carefully cut Install Slam Jam Rim to Backboard 12/06 ID# M6809011 ID# M6809011 12/06 If Using Sand 2 Gallons of ANTI-FREEZE is not Required Handle 21 can be removed and stored by removing pin