Huffy Universal Elevator Mount manual Regulation RIM Height

Page 10

3. NOTE: Two people required for this
procedure, elevator assembly is
heavy. Mount assembled elevator
components to mounting brackets (24)
as shown. (Refer to Steps 6 through 13	22
for elevator assembly.)	22

10 ft.

(3.05 m)

REGULATION RIM HEIGHT

IS 10 FEET (3.05 m).

P/N 211125A 10/01

Image 10

Contents Safety Instructions IMPORTANT! Have questions...don’t go back to the storeHeight Adjustment Channel 2 and position angle brackets Install angle brackets 6 and 7 to lower holes onRoof Mounting Horizontally on roof. Tighten until snug 10/01 211125A106 10/01 211125A Not Included Height Adjustment Procedure, elevator assembly is For Pole Mounting onlyFlat Surface Mounting Regulation RIM Height Parts List Hardware Identifier