FLAT SURFACE MOUNTING
1. Mark bracket positions on flat solid surface. Upper bracket mounting holes should be located approx. 106” (2.7 m) above playing surface. Drill four, 3/8” (9.5 mm) holes into solid structure for mounting brackets (24).
MOUNTING
HOLE
PATTERN
WARNING
A solid mounting base and/or surface,
capable of withstanding normal recreational use forces, must be provided by the customer. A reliable carpenter or building contractor should be consulted if there are questions regarding this procedure.
8”
(20.3 cm)
4”
(10.16 cm)
24
106”
(2.7 m)
PLAYING
SURFACE
24
2. Secure mounting brackets (24) to flat solid surface. Install bolt heads outside for safety reasons.
NOTE: Hardware for this procedure not included due to various roof construction materials and design structure.
9
10/01 P/N 211125A