Huffy Universal Elevator Mount manual Height Adjustment

Page 7

14. NOTE: Two people are required for this procedure, use caution, elevator assembly is heavy. Attach backboard and elevator assembly to u-channel (2).

2

22

3

17

18

HEIGHT ADJUSTMENT

15. Insert the end of a broom handle or wooden dowel 3/4”-7/8” diameter (19-22 mm) into the release lever.

Push up and move away from tube to raise and lower

Release Lever

IMPORTANT!

Push up, move toward tube

and lower to lock.

Broom Handle or

Wooden Dowel

(not included)

7

10/01 P/N 211125A

Image 7
Contents IMPORTANT! Have questions...don’t go back to the store Safety InstructionsHeight Adjustment Horizontally on roof. Tighten until snug 10/01 211125A Install angle brackets 6 and 7 to lower holes onRoof Mounting Channel 2 and position angle brackets106 10/01 211125A Included NotHeight Adjustment For Pole Mounting only Procedure, elevator assembly isFlat Surface Mounting Regulation RIM Height Hardware Identifier Parts List