JVC CA-UXZ7MD, LVT0900-004A Precautions on CD Playback, Playing Back the Entire CD-Normal Play

Page 25

Precautions on CD Playback

This unit has been designed to play back discs bearing the following logos:

Audio CD

CD Recordable (CD-R)

CD ReWritable (CD-RW)

In addition to the above discs, this unit can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already “finalized.” If you try to play back unfinalized discs, “CD NO DISC” may appear in the main display.

•You can play back your original CD-Rs or CD-RWs recorded in audio CD format ONLY. (If CD-RWs have been recorded in different format, erase all the data on CD-RWs completely before re-recording on the discs.)

DO NOT play back CD-Rs or CD-RWs recorded with sound files such as MP3.

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

Important notices:

•In general, you will have the best performance by keeping your discs and the mechanism clean.

–Store discs in their cases, and keep them in cabinets or on shelves.

–Keep the unit’s disc tray closed when not in use.

•Continuous use of irregular shaped discs (heart-shape, octagonal, etc.) can damage the disc rotating mechanism.

Playing Back the Entire CD—Normal Play

1 Press CD 0 on the main unit.

The unit automatically turns on, the electronic swing panel slides downward, then the disc tray comes out.

Disc tray

Electronic swing panel

2 Place a disc correctly on the circle of the disc tray with its label side up.

 

 

 

Good

No good

 

 

 

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CD 3/8.

The disc tray closes, then the electronic swing panel slides upward automatically.

The CD indicator starts flashing on the display and disc playback starts from the first track of the disc.

•If you press CD 0 instead of CD 3/8, the disc tray and electronic swing panel close, but disc playback does not start.

CD (disc) indicator

The current track No.

Elapsed playing time

Disc playback stops after playing all the tracks of the disc.

English

• CD-RWs may require a longer readout time since the

 

reflectance of CD-RWs is lower than for regular CDs.

To stop during play, press 7.

 

To remove the disc, press CD 0.

 

• After removing the disc, press CD 0 again to close the

 

disc tray.

– 20 –

Page 24 Page 26
Image 25
Page 24 Page 26
Contents UX-Z7MD-Consists of CA-UXZ7MD and SP-UXZ7MD Micro Component MD SystemPage English UX-Z7MD Class Laser Product Introduction PrecautionsContents Main Unit Location of the ButtonsMain unit Display window Display window on the electronic swing panelPressing one of these buttons also turns on the unit Remote ControlBefore connecting it, disconnect the supplied FM antenna Connecting AntennasGetting Started UnpackingYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo remove the speaker grilles Connecting External EquipmentTo connect external equipment Speaker grilles are removable as illustrated belowR6PSUM-3/AA15F Putting the Batteries into the Remote ControlBasic and Common Operations Remote controlSetting the Auto Power Off Turning On the PowerTurning On/Off the Key-touch Tone To turn off the clock indication power save mode Setting the ClockTo check the clock time with tones If Cannot Listen appears in the main display To increase the volume, turn Volume + / control ClockwiseFor private listening Sound indicator goes off from the display To check the sound mode currently selected, pressReinforcing the Bass Sound Selecting the Sound ModesTo select the illumination color Setting the Display IlluminationTo create your favorite colors To change the display brightnessListening to FM and AM Broadcasts Remote control Main unitTuning in to a Station Setting the AM Tuner Interval SpacingTo change the FM reception mode On the remote control only Press FM ModeTuning in to a Preset Station Presetting StationsPress the number buttons to select a preset number Press SETPlaying Back CDs CD-R/CD-RW Playing Back the Entire CD-Normal Play Precautions on CD PlaybackBasic CD Operations To go to another track directly using the number buttonsProgram Play To stop playback for a momentPlaying at Random-Random Play To check the program contentsRepeating Tracks-Repeat Play To modify the programPlaying Back MDs To locate a particular point in a track during play Basic MD OperationsWhile playing or pausing About MD indicatorOn the remote control only Load an MD Press MD 3/8, then To change the information shown in the main displayTracks of the loaded MD will play at random To erase the entire program, press MD 0 to eject the MDTracks are played at random To skip the playing track, press ¢Press Group Skip or Group Skip to select a group Playing Tracks in a Group-Group PlayTo go to another track in the same group, press ¢ or To go to another group, press Group SkipSearching for Tracks to Play MD Title Search Playing Back Tapes Playing Back a Tape To play both sides-Reverse modePush Push Open Put a cassette in with the exposed part of the tape downListening to External Equipment For how to apply sound effects, see Adjusting the Audio Input LevelListening to External Equipment Recording About the track marks Before You Start Recording on an MDTo avoid erasing important recordings To put a track mark manually while recording anStereo Long-Hour Recording Mdlp Precautions for performing long-hour stereo recordingAbout High-Speed Recording To check the remaining recording timeTo set the recording length mode Setting MD Recording ModesTo set LP-prefix addition mode To set Group recording modeTo record a single track during play or pause Recording Other Sources onto an MDBefore You Start Recording on a Tape To clean the heads, capstans, and pinch rollersTo protect your recordings To keep the best recording and playback sound qualityTo record a single track of a CD/MD during play Recording onto a TapePrepare the source to record To record a disc To record an MDWhen recording on an MD and a tape at the same time Press REV.MODE to select the reverse modeFor the tape Press MD&TAPE RECEditing MDs How to make up Groups Using MD Group functionsGuidance-MD Group Functions Classifying the tracks on an MDIntroducing Group Editing Functions Press SET During playback Forming a Group-FORM GRPress ¢or 4to select the first track of a new group Press ¢or 4to select the last track of the new groupAdding a Track to a Group-ENTRY GR When Cannot ENTRY! appears in stepPress ¢or 4to select the track Or Group SkipTo join the divided groups again, see the Join GR Dividing a Group-DIVIDE GRFunction on Joining Two Groups-JOIN GR When Cannot Join appears in stepTo divide the group again, see the Divide GR function Moving a Group-MOVE GR Ungrouping Tracks-UNGROUP To cancel the setting, press CancelDissolving All Groups-UNGR ALL Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Dividing a Track-DIVIDE Press or to precisely adjust the dividing pointPress ¢or 4to select the track you want to divide To join the divided tracks again, see the Join functionJoining Two Tracks-JOIN When the track belongs to a groupTo divide the joined tracks, see the Divide function on If Cannot Join appears in stepPress ¢or 4to select the track you want to move Moving a Track-MOVEErasing All Tracks-ALL Erase Erasing Tracks-ERASEPress SET Press ¢or 4to select the track you want to erase Assigning Titles to an MD Press or to change the title entry modeFor the group title For the disc and track titleRepeat steps 5 1 and 5 2 to enter other characters Press Cancel to exit from the title entry modePress Enter to finish the current title entry For the disc titleYou can make a correction or change the title Changing the TitleMake sure that the character you want to change is flashing Using the Timers How Recording Timer actually works Using Recording TimerHow Daily Timer actually works Using Daily TimerTo turn off the Recording Timer after its setting is done To turn on the Recording Timer againTo turn on the Daily Timer again To turn off the Daily Timer after its setting is doneVolume setting appears in the main display If the unit is kept turned on when the timer-on time comesTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance Additional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Symptoms CauseHcms High-speed Copy Management System MD limitationsCannot REC x1 or x2 only CD/MD MessagesEnglish Symptom TroubleshootingAUX/DVD SpecificationsEN, CS 0602MWMMDWJEM

CA-UXZ7MD, LVT0900-004A specifications

The JVC LVT0900-004A, CA-UXZ7MD is a sophisticated compact audio system designed for music enthusiasts who appreciate both sound quality and versatility. This system reflects JVC's commitment to delivering exceptional audio experiences with advanced technologies and features that cater to various listening preferences.

One of the standout features of the CA-UXZ7MD is its powerful audio output, which is achieved through a dynamic speaker system. This allows users to enjoy rich, room-filling sound whether they're listening to music, watching movies, or even gaming. The system is equipped with a built-in amplifier that enhances the overall audio performance, ensuring clear highs, balanced mids, and deep, resonant bass.

In terms of connectivity, the CA-UXZ7MD is designed to accommodate modern streaming habits. It offers Bluetooth functionality, allowing users to wirelessly connect their smartphones, tablets, or laptops. This feature is complemented by a USB port that enables playback from USB drives and devices, providing further flexibility in how users access their music libraries. Additionally, the system supports various audio formats, ensuring compatibility with different file types for seamless playback.

The user-friendly interface of the CA-UXZ7MD makes it easy to navigate through different audio sources and settings. The clearly labeled control buttons and intuitive layout enhance the overall user experience, making it accessible for individuals of all ages. The built-in FM tuner also adds another dimension to its functionality, allowing users to enjoy their favorite radio stations with ease.

JVC has incorporated advanced sound processing technologies into the CA-UXZ7MD to further elevate audio quality. Features such as equalizer presets enable users to tailor the sound profile to match their preferences or the music genre being played. This level of customization enhances the listening experience, making it more enjoyable and immersive.

The compact design of the CA-UXZ7MD makes it an ideal choice for various settings, whether it's a small apartment, a home office, or even a bedroom. Its sleek aesthetics ensure that it fits seamlessly with any decor while providing powerful audio performance.

In summary, the JVC LVT0900-004A, CA-UXZ7MD stands out as a versatile and high-quality compact audio system. With its robust sound output, extensive connectivity options, user-friendly interface, and advanced sound processing features, it caters to the diverse needs of modern audio consumers. This system is not just about playing music; it’s about creating a memorable auditory experience that can be enjoyed anytime, anywhere.
Top Page Image Contents