JVC CA-UXZ7MD, LVT0900-004A manual Listening to External Equipment, Adjusting the Audio Input Level

Page 37

Listening to External Equipment

You can listen to external equipment connected to the AUX/DVD jacks on the rear of the unit.

First make sure that the external equipment is properly connected as follows:

DO NOT connect other equipment while the power is on.

 

Right

External equipment

 

 

Left

 

R

 

L

 

To AUX/DVD jacks

SPEAKERS

R

L

CAUTION: R

L

SPEAKER IMPEDANCE 4~16

1 Press FM/AM/AUX (or AUX/DVD on the main unit) repeatedly so that “AUX” appears in the main display.

On the remote control:

Each time you press the button, the source changes as follows:

FM AM

AUX

2 Adjust the volume level of the unit to “VOLUME 0.”

3 Start playing the external equipment.

For operation of the external equipment, see the manuals supplied with it.

4 Adjust the volume level of the unit to your desired listening level.

5 Apply sound effects, if you wish.

• For how to apply sound effects, see page 14.

Adjusting the Audio Input Level

If the sound from the component connected to the AUX/DVD jacks is too loud or is not loud enough when changing from another source to “AUX” (without changing the volume level), you can change the audio input level through the AUX/DVD jacks.

1 Press FM/AM/AUX (or AUX/DVD on the main unit) repeatedly so that “AUX” appears in the main display.

On the remote control:

Each time you press the button, the source changes as follows:

FM AM

AUX

2 Press and hold SET on the remote control for more than 2 seconds.

Each time you press and hold the button, the audio input level alternates between “LEVEL 1” and “LEVEL 2.”

LEVEL 1: Select this when the sound is too loud (initial setting).

LEVEL 2: Select this when the sound is not loud enough.

To change the information shown in the main display

On the remote control ONLY:

Each time you press DISP/CHARA, the information in the main display alternates between the source indication and the clock indication.

If an MD is inserted, the MD remaining recording time (“REC REMAIN”) is shown before the clock indication.

English

– 32 –

Image 37
Contents UX-Z7MD-Consists of CA-UXZ7MD and SP-UXZ7MD Micro Component MD SystemPage English UX-Z7MD Class Laser Product Introduction PrecautionsContents Main Unit Location of the ButtonsMain unit Display window Display window on the electronic swing panelPressing one of these buttons also turns on the unit Remote ControlBefore connecting it, disconnect the supplied FM antenna Connecting AntennasGetting Started UnpackingYou can connect the speakers using the speaker cords Connecting SpeakersAM antenna To connect an outdoor AM antennaTo remove the speaker grilles Connecting External EquipmentTo connect external equipment Speaker grilles are removable as illustrated belowR6PSUM-3/AA15F Putting the Batteries into the Remote ControlBasic and Common Operations Remote controlSetting the Auto Power Off Turning On the PowerTurning On/Off the Key-touch Tone To turn off the clock indication power save mode Setting the ClockTo check the clock time with tones If Cannot Listen appears in the main display To increase the volume, turn Volume + / control ClockwiseFor private listening Sound indicator goes off from the display To check the sound mode currently selected, pressReinforcing the Bass Sound Selecting the Sound ModesTo select the illumination color Setting the Display IlluminationTo create your favorite colors To change the display brightnessListening to FM and AM Broadcasts Remote control Main unitTuning in to a Station Setting the AM Tuner Interval SpacingTo change the FM reception mode On the remote control only Press FM ModeTuning in to a Preset Station Presetting StationsPress the number buttons to select a preset number Press SETPlaying Back CDs CD-R/CD-RW Playing Back the Entire CD-Normal Play Precautions on CD PlaybackBasic CD Operations To go to another track directly using the number buttonsProgram Play To stop playback for a momentPlaying at Random-Random Play To check the program contentsRepeating Tracks-Repeat Play To modify the programPlaying Back MDs To locate a particular point in a track during play Basic MD OperationsWhile playing or pausing About MD indicatorOn the remote control only Load an MD Press MD 3/8, then To change the information shown in the main displayTracks of the loaded MD will play at random To erase the entire program, press MD 0 to eject the MDTracks are played at random To skip the playing track, press ¢Press Group Skip or Group Skip to select a group Playing Tracks in a Group-Group PlayTo go to another track in the same group, press ¢ or To go to another group, press Group SkipSearching for Tracks to Play MD Title Search Playing Back Tapes Playing Back a Tape To play both sides-Reverse modePush Push Open Put a cassette in with the exposed part of the tape downListening to External Equipment For how to apply sound effects, see Adjusting the Audio Input LevelListening to External Equipment Recording About the track marks Before You Start Recording on an MDTo avoid erasing important recordings To put a track mark manually while recording anStereo Long-Hour Recording Mdlp Precautions for performing long-hour stereo recordingAbout High-Speed Recording To check the remaining recording timeTo set the recording length mode Setting MD Recording ModesTo set LP-prefix addition mode To set Group recording modeTo record a single track during play or pause Recording Other Sources onto an MDBefore You Start Recording on a Tape To clean the heads, capstans, and pinch rollersTo protect your recordings To keep the best recording and playback sound qualityTo record a single track of a CD/MD during play Recording onto a TapePrepare the source to record To record a disc To record an MDWhen recording on an MD and a tape at the same time Press REV.MODE to select the reverse modeFor the tape Press MD&TAPE RECEditing MDs How to make up Groups Using MD Group functionsGuidance-MD Group Functions Classifying the tracks on an MDIntroducing Group Editing Functions Press SET During playback Forming a Group-FORM GRPress ¢or 4to select the first track of a new group Press ¢or 4to select the last track of the new groupAdding a Track to a Group-ENTRY GR When Cannot ENTRY! appears in stepPress ¢or 4to select the track Or Group SkipTo join the divided groups again, see the Join GR Dividing a Group-DIVIDE GRFunction on Joining Two Groups-JOIN GR When Cannot Join appears in stepTo divide the group again, see the Divide GR function Moving a Group-MOVE GR Ungrouping Tracks-UNGROUP To cancel the setting, press CancelDissolving All Groups-UNGR ALL Erasing Tracks in a Group-ERASE GR Introducing Track Editing Functions Dividing a Track-DIVIDE Press or to precisely adjust the dividing pointPress ¢or 4to select the track you want to divide To join the divided tracks again, see the Join functionJoining Two Tracks-JOIN When the track belongs to a groupTo divide the joined tracks, see the Divide function on If Cannot Join appears in stepPress ¢or 4to select the track you want to move Moving a Track-MOVEErasing All Tracks-ALL Erase Erasing Tracks-ERASEPress SET Press ¢or 4to select the track you want to erase Assigning Titles to an MD Press or to change the title entry modeFor the group title For the disc and track titleRepeat steps 5 1 and 5 2 to enter other characters Press Cancel to exit from the title entry modePress Enter to finish the current title entry For the disc titleYou can make a correction or change the title Changing the TitleMake sure that the character you want to change is flashing Using the Timers How Recording Timer actually works Using Recording TimerHow Daily Timer actually works Using Daily TimerTo turn off the Recording Timer after its setting is done To turn on the Recording Timer againTo turn on the Daily Timer again To turn off the Daily Timer after its setting is doneVolume setting appears in the main display If the unit is kept turned on when the timer-on time comesTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance Additional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Symptoms CauseHcms High-speed Copy Management System MD limitationsCannot REC x1 or x2 only CD/MD MessagesEnglish Symptom TroubleshootingAUX/DVD SpecificationsEN, CS 0602MWMMDWJEM

CA-UXZ7MD, LVT0900-004A specifications

The JVC LVT0900-004A, CA-UXZ7MD is a sophisticated compact audio system designed for music enthusiasts who appreciate both sound quality and versatility. This system reflects JVC's commitment to delivering exceptional audio experiences with advanced technologies and features that cater to various listening preferences.

One of the standout features of the CA-UXZ7MD is its powerful audio output, which is achieved through a dynamic speaker system. This allows users to enjoy rich, room-filling sound whether they're listening to music, watching movies, or even gaming. The system is equipped with a built-in amplifier that enhances the overall audio performance, ensuring clear highs, balanced mids, and deep, resonant bass.

In terms of connectivity, the CA-UXZ7MD is designed to accommodate modern streaming habits. It offers Bluetooth functionality, allowing users to wirelessly connect their smartphones, tablets, or laptops. This feature is complemented by a USB port that enables playback from USB drives and devices, providing further flexibility in how users access their music libraries. Additionally, the system supports various audio formats, ensuring compatibility with different file types for seamless playback.

The user-friendly interface of the CA-UXZ7MD makes it easy to navigate through different audio sources and settings. The clearly labeled control buttons and intuitive layout enhance the overall user experience, making it accessible for individuals of all ages. The built-in FM tuner also adds another dimension to its functionality, allowing users to enjoy their favorite radio stations with ease.

JVC has incorporated advanced sound processing technologies into the CA-UXZ7MD to further elevate audio quality. Features such as equalizer presets enable users to tailor the sound profile to match their preferences or the music genre being played. This level of customization enhances the listening experience, making it more enjoyable and immersive.

The compact design of the CA-UXZ7MD makes it an ideal choice for various settings, whether it's a small apartment, a home office, or even a bedroom. Its sleek aesthetics ensure that it fits seamlessly with any decor while providing powerful audio performance.

In summary, the JVC LVT0900-004A, CA-UXZ7MD stands out as a versatile and high-quality compact audio system. With its robust sound output, extensive connectivity options, user-friendly interface, and advanced sound processing features, it caters to the diverse needs of modern audio consumers. This system is not just about playing music; it’s about creating a memorable auditory experience that can be enjoyed anytime, anywhere.