Installing MID Panel

PULL MID PANEL UP AND OVER THROUGH

CHANNELS IN RAFTER EXTRUSIONS.

INSERT FINGERS OF WHEELED PANEL GUIDE
INTO THE OPEN END OF THE RAFTER AND
WELDMENT. TIGHTEN THE BUTTERFLY NUT.
REVERSE FOR OPPOSITE SIDE OF BAY.	RAFTER
	WHEELED PANEL
	GUIDE

INSTALLING 2-PC GABLED END

WHEELED PANEL

GUIDE AT EAVE

SECURE LACE LINE AT TOP & BOTTOM WITH FASTEX BUCKLES

STANDARD LOOP & GROMMET LACING

USE LONG LIFTING POLE TO PUSH EACH HALF TO PEAK.

TIE OFF BOTTOM LOOP

FABRIC TENSIONING

TOP

CATENARY

TAILSTENSIONING

WEB (RIGHT)

W/ RING

TENSIONING
WEB (LEFT)
W/ RING		TENSIONING RINGS
		TENSIONING RINGS
		OVERLAPPED
	UPRIGHT		ATTACH WEB/RATCHET
	UPRIGHT		TO TRIANGLE RING AND
			TO TRIANGLE RING AND
		WEB/RATCHET	TENSION DOWNWARD.
		WEB/RATCHET

TENSIONING METHOD:

1.PASS RING OF LEFT TENSIONING WEB THROUGH OPPOSITE CATENARY RING.

2.PASS RING OF RIGHT TENSIONING WEB THROUGH ITS OWN CATENARY RING (PASSING OVER THE LEFT WEB).

3.CONTINUE RING OF RIGHT TENSIONING WEB THROUGH OPPOSITE CATENARY RING.

4.OVERLAP BOTH TENSION RINGS. ATTACH WEB/RATHCET AND TENSION DOWNARD AGAINST TENSION HOLE IN UPRIGHT. (CATENARY RINGS SHOULD MOVE CLOSER TOGETHER AS RATHCET IS TIGHTENED.)

1.USE WEB/ RATCHETS TO SECURE CATENARY ARCHES TO UPRIGHTS, STAKE BASEPLATES BEFORE TENSIONING WEBS.