JVC CA-UXG68 manual Advanced Playback Operations see pages, Audio/Video File Operations see pages

Page 41

Daily Operations—Sound & Other Adjustments

(see pages 12 to 15)

Adjusting the Sound:

This function also affects the sound through the headphones.

Changing the Scanning Mode:

You cannot change the scanning mode to progressive in the following cases:

When your TV does not support the progressive video input.

When you have not connected your TV to the system using a component video cord.

Setting the Clock:

“0:00” will flash on the display until you set the clock.

The clock may gain or lose 1 to 2 minutes per month. If this happens, reset the clock.

Unique DVD/VCD Operations (see pages 16 to 18)

Selecting the Audio Track:

On some DVD Video discs, you cannot change audio languages while playing back.

Special Effect Playback:

During slow-motion playback, no sound will be reproduced.

While zoomed in, the picture may look coarse.

Advanced Playback Operations (see pages 19

to 25)

Programming the Playing Order—Program Play:

While programming steps...

Your entry will be ignored if you have tried to program an item number that does not exist (for example, selecting track 14 on a disc that only has 12 tracks).

Playing Repeatedly:

A-B Repeat can be used within the same title while playing a DVD Video, and within the same track for the other discs.

On-screen Bar Operations:

For DVD-R/-RW in the VR format, “PG” or “PL” appears instead of “TITLE” on the on-screen bar.

Audio/Video File Operations (see pages 26

and 27)

Operations on the Control Screen:

If you press ON SCREEN on the remote control during video file playback, playback information appears on the TV screen.

If you press ON SCREEN on the remote control during audio file playback, “ ” will appear on the TV screen.

Advanced Tape Operations (see pages 28 and 29)

Recording on a Tape:

The recording level is automatically set correctly. Thus, you can adjust the sound you are actually listening to without affecting the recording level.

There is leader tape which cannot be recorded onto at the start and end of cassette tapes. Thus, when recording CDs

or radio broadcasts, wind the leader tape first to ensure that the recording will be made without any music part lost.

If you start recording with no cassette inserted, “NO REC” appears on the display. If a protected tape has been inserted, “NO REC” appears.

You cannot open or close the disc tray while recording a disc.

Synchronized Recording:

Synchronized recording does not function on the file format of MPEG-1, MPEG-2, ASF, and DivX.

Enjoying Karaoke (see pages 30 to 32) (Not

available in the Australian model)

Singing Along (Karaoke):

Karaoke mode setting (Key Control and Vocal Masking) can be used when selecting “DVD/CD” or “USB MEMORY” as the source, except for DVD-VR/DVD Audio/MPEG-1/MPEG-2/ASF/DivX files.

Even if the source is “DVD/CD” or “USB MEMORY,” Karaoke mode setting cannot be used while “NO DISC” or “NO DEVICE” appears on the display.

Karaoke mode setting is automatically canceled when the source is changed.

When selecting “DVD/CD” or “USB MEMORY” as the source, the microphone is not available while playback is stopped or paused. To use the microphone, activate Key Control or Vocal Masking.

Karaoke mode setting is also applied to the optical digital output signals.

When Vocal Masking is activated, 3D Phonic will be canceled temporarily.

On some music discs, Vocal Masking does not provide the correct effect.

You can also use the microphone when selecting “FM,” “AM,” or “AUX” as the source. When selecting “TAPE” as the source, you can use the microphone only during tape playback.

Timer Operations (see pages 33 and 34)

Setting the Timer:

If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when the timer is activated.

When you unplug the AC power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again.

If you set DVD Video as the source, Daily Timer will not work correctly.

Timer Priority:

If you set the Sleep Timer after Daily Timer starts playing the selected source, Daily Timer is canceled.

39

Image 41
Contents Instructions Important for Laser Products Introduction PrecautionsContents Playable Disc/File Types How to Read This ManualAudio formats About color systemConnections Supplied accessoriesRear panel Front panel~ AM/FM antenna To connect the powered subwooferSpeakers To assemble the AM loop antenna To connect AM/FM antennaTV/monitor Preparing the remote control@ Digital audio component Before plugging in the System except for AustraliaQ w e rt y u i o a s Display IndicatorsConnecting or putting on the headphones Speakers. Be sure to turn down the volume beforeDaily Operations-Playback Mainly explained however, you can use the buttonsListening to the Radio Info To preset the stationsTo select the band FM or AM To tune in to a stationPlaying Back a Tape Select a preset number for the station you store ExamplesTo insert a tape To startTo insert a disc Playing Back a Disc/File InfoTo playback a disc/file To select a title/groupPortable Audio Device Playing Back aTo activate QP Link To locate an item directlyAdjusting the Sound Info Adjusting the VolumeTo drop the volume in a moment To reinforce the heavy soundPresetting Automatic DVD Video Sound Using Headphone SurroundCreating 3-dimensional Sound Field -3D Phonic While playing a disc Remote controlTo adjust the picture tone To select a preset picture toneChanging the Scanning Mode Changing the Picture ToneAuto Standby Sleep TimerWhile playing a DVD Video Unique DVD/VCD OperationsSelecting the Audio Track Selecting the View Angle Selecting the Subtitle LanguagePlaying Back Bonus Group Selecting the Browsable Still PicturesSlow-motion playback Frame-by-frame playbackZoom To replay the previous scenes One-Touch ReplayProgramming the Playing Order Advanced Playback OperationsBefore starting playback, activate Program Play For SVCD/VCD/CDTo modify the program To check the programmed contentsTo exit from Random Play To exit from Program PlayRepeat Playing RepeatedlyRepeat Play On-screen Bar Operations On-screen Bar InformationDisc type Playback information Operation modesTo change the time information To operate using the On-screen BarChapter/Track Search Time SearchTo select the Program To select the Play List Control screen for DVD-R/-RW in DVD-VR formatBrowsable Still Pictures Operations on the Control Screen Audio/Video File OperationsTo move the highlight bar between group list and track list To select an item in the listTo skip a track To stop playback For JpegTo select a group Recording on a Tape Info Advanced Tape OperationsInsert a recordable cassette Start recordingTo record only your favorite track Synchronized Recording InfoTo record the entire tracks Singing Along Karaoke Info To sing along using the Karaoke discsEnjoying Karaoke To apply echo to your voice To adjust the Key disc/file playback onlyMicrophone Mixing To exit from Karaoke Program Play Karaoke Program PlayReserving Karaoke Songs Setting the Timer Timer OperationsHow Recording Timer works To turn on or off the TimerHow Daily Timer works Contents Setup Menu Operations InfoLanguage menu Picture menuOthers menu Audio menuLearning More about This System Additional InformationDaily Operations-Playback see pages 7 to Listening to the RadioPlaying Back a Portable Audio Device Advanced Playback Operations see pages Daily Operations-Sound & Other AdjustmentsAudio/Video File Operations see pages Unique DVD/VCD Operations see pages 16 toSetup Menu Operations see pages 35 MaintenanceCleaning the System Handling discsTroubleshooting Serbian Language Code ListOperating JVC’s TVs Using the Remote Control Optical Digital OUT SignalsSpecifications Main unit Remote controlParts Index UX-G68 Micro Component System