JVC 0207WMKMDCJEM Additional Information, Learning More about This System, Listening to the Radio

Page 39

Additional Information

Learning More about This System

Connections (see pages 3 to 5)

Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords and the AC power cord. This could cause poor reception.

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the System.

The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers.

Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above instructions. If this happens, move the speakers away from the TV.

Daily Operations—Playback (see pages 7 to 11)

Listening to the Radio:

If you store a new station into an occupied preset number, the previously stored station in that number will be erased.

When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again.

Playing Back a Disc/File:

When you change the source to DVD/CD or USB MEMORY, it may take a while to activate the source.

The following functions cannot be used for the files in the USB mass storage class device:

Selecting the View Angle (page 17)

Special Effect Playback (page 18)

Program Play (page 19)

A-B Repeat (page 21)

Time Search (page 24)

On some DVD, SVCD, or VCD discs, the actual operations may be different from what is explained in this manual, due to the programming and disc structure; such differences are not a malfunction of this System.

If you playback a DVD Video for more than 10 hours, “_” appears instead of the hour digits.

Some DVD Audio discs prohibit downmix. When you playback such a disc, “LR ONLY” appears on the display and the System plays back the left front and right front signals.

When playing back a DVD Audio disc recorded in MLP (Meridian Lossless Packing; a lossless audio compression system that can completely recreate the PCM signal), the signals are recognized as the linear PCM signals, however, no indicator lights up on the display.

This System can recognize up to 4 000 tracks in a disc. Also, the System can recognize up to 150 tracks per group and up to 99 groups in a disc.

If there are any unplayable files in a folder, those files are also counted in the total file number.

Playable files which do not belong to any groups are handled as group 1.

For playback of files in the USB mass storage class device...

While the System is reading a disc, changing the source to USB MEMORY may cause the System to continue playback the DVD/CD source. In this case, press 7 on the main unit to reactivate the USB source.

When connecting a USB mass storage class device, refer also to its manual.

Connect one USB mass storage class device to the System at a time. Do not use a USB hub.

You cannot charge any USB device through the USB MEMORY jack of this System.

While playing back a file in a USB mass storage class device, do not disconnect the device. It may cause a malfunction of both the System and the device.

JVC bears no responsibility for any loss of data in the USB mass storage class device while using this System.

When connecting with a USB cable, use the cable whose length is less than 1 m.

This System is compatible with the USB Full-Speed (not compatible with the USB 1.1).

You can playback the following types of files in a USB mass storage class device (maximum data transfer rate:

2 Mbps):

Music: MP3, WMA, WAV

Picture: JPEG

Movie: MPEG-1, MPEG-2, ASF, DivX (maximum frame rate of 30 fps for progressive)

You cannot playback a file larger than 2 Gigabyte.

When playing a file which has a large transfer rate, frames or sounds may be dropped during playback.

This System cannot recognize a USB mass storage class device whose rating is other than 5 V and does not exceed 500 mA.

This System may not playback some USB mass storage class devices and does not support DRM (Digital Rights Management).

This System may not playback some files even though their formats are listed above.

It will take some time to start up a Digital Audio Player (DAP) larger than 1 Gigabyte.

For DVD-VR playback...

This System can play only a disc of UDF-Bridge format.

For details about DVD-VR format and play list, refer to the manual of the recording equipment.

You cannot use reverse slow motion, Program Play, or Random Play.

37

Image 39
Contents Instructions Important for Laser Products Precautions ContentsIntroduction About color system How to Read This ManualPlayable Disc/File Types Audio formatsFront panel Supplied accessoriesConnections Rear panelTo assemble the AM loop antenna To connect AM/FM antenna To connect the powered subwoofer~ AM/FM antenna SpeakersBefore plugging in the System except for Australia Preparing the remote controlTV/monitor @ Digital audio componentQ w e rt y u i o a s Display IndicatorsMainly explained however, you can use the buttons Speakers. Be sure to turn down the volume beforeConnecting or putting on the headphones Daily Operations-PlaybackTo tune in to a station To preset the stationsListening to the Radio Info To select the band FM or AMTo start Select a preset number for the station you store ExamplesPlaying Back a Tape To insert a tapeTo select a title/group Playing Back a Disc/File InfoTo insert a disc To playback a disc/fileTo locate an item directly Playing Back aPortable Audio Device To activate QP LinkTo reinforce the heavy sound Adjusting the VolumeAdjusting the Sound Info To drop the volume in a momentWhile playing a disc Remote control Using Headphone SurroundPresetting Automatic DVD Video Sound Creating 3-dimensional Sound Field -3D PhonicChanging the Picture Tone To select a preset picture toneTo adjust the picture tone Changing the Scanning ModeAuto Standby Sleep TimerUnique DVD/VCD Operations Selecting the Audio TrackWhile playing a DVD Video Selecting the Browsable Still Pictures Selecting the Subtitle LanguageSelecting the View Angle Playing Back Bonus GroupTo replay the previous scenes One-Touch Replay Frame-by-frame playbackSlow-motion playback ZoomFor SVCD/VCD/CD Advanced Playback OperationsProgramming the Playing Order Before starting playback, activate Program PlayTo exit from Program Play To check the programmed contentsTo modify the program To exit from Random PlayPlaying Repeatedly Repeat PlayRepeat Operation modes On-screen Bar InformationOn-screen Bar Operations Disc type Playback informationTo change the time information To operate using the On-screen BarChapter/Track Search Time SearchControl screen for DVD-R/-RW in DVD-VR format Browsable Still PicturesTo select the Program To select the Play List To select an item in the list Audio/Video File OperationsOperations on the Control Screen To move the highlight bar between group list and track listFor Jpeg To select a groupTo skip a track To stop playback Start recording Advanced Tape OperationsRecording on a Tape Info Insert a recordable cassetteSynchronized Recording Info To record the entire tracksTo record only your favorite track To sing along using the Karaoke discs Enjoying KaraokeSinging Along Karaoke Info To adjust the Key disc/file playback only Microphone MixingTo apply echo to your voice Karaoke Program Play Reserving Karaoke SongsTo exit from Karaoke Program Play Setting the Timer Timer OperationsTo turn on or off the Timer How Daily Timer worksHow Recording Timer works Picture menu Setup Menu Operations InfoContents Language menuOthers menu Audio menuListening to the Radio Additional InformationLearning More about This System Daily Operations-Playback see pages 7 toPlaying Back a Portable Audio Device Unique DVD/VCD Operations see pages 16 to Daily Operations-Sound & Other AdjustmentsAdvanced Playback Operations see pages Audio/Video File Operations see pagesHandling discs MaintenanceSetup Menu Operations see pages 35 Cleaning the SystemTroubleshooting Serbian Language Code ListOperating JVC’s TVs Using the Remote Control Optical Digital OUT SignalsSpecifications Remote control Parts IndexMain unit UX-G68 Micro Component System