Omron BF510 instruction manual Measuring Weight Only

Page 11

5.Measuring Weight Only

Interpreting the BMI Result

 

 

BMI

BMI (Designation by the WHO)

BMI Classification Bar

BMI Rating

 

 

 

 

 

 

 

 

 

 

 

 

BMI < 18.5

- (Underweight)

 

7.0

- 10.7

 

 

 

10.8 - 14.5

 

 

 

 

 

14.6

- 18.4

 

 

 

 

 

 

 

 

>_

 

0 (Normal)

 

18.5

- 20.5

 

 

 

 

 

18.5

<

BMI < 25

 

20.6 - 22.7

 

 

 

 

 

22.8

- 24.9

 

 

 

 

 

 

 

 

>_

 

+ (Overweight)

 

25.0

- 26.5

 

 

 

 

 

25

<

BMI < 30

 

26.6 - 28.2

 

 

 

 

 

28.3

- 29.9

 

 

 

 

 

 

 

 

>_

 

++ (Obese)

 

30.0

- 34.9

 

 

 

 

 

30

<

BMI

 

35.0 - 39.9

 

 

 

 

 

 

 

40.0

- 90.0

 

 

 

 

 

 

 

The above-mentioned indices refer to the values for obesity judgment proposed by WHO, the World Health Organization.

Interpreting the Skeletal Muscle Percentage Result

Gender

Age

Low (–)

Normal (0)

High (+)

Very High (++)

 

 

18-39

< 24.3%

24.3 - 30.3%

30.4 - 35.3%

_

 

 

> 35.4%

Female

40-59

< 24.1%

24.1 - 30.1%

30.2 - 35.1%

_

> 35.2%

 

 

60-80

< 23.9%

23.9 - 29.9%

30.0 - 34.9%

_

 

 

> 35.0%

 

 

18-39

< 33.3%

33.3 - 39.3%

39.4 - 44.0%

_

 

 

> 44.1%

Male

40-59

< 33.1%

33.1 - 39.1%

39.2 - 43.8%

_

> 43.9%

 

 

60-80

< 32.9%

32.9 - 38.9%

39.0 - 43.6%

_

 

 

> 43.7%

According to Omron Healthcare figures

6.After confirmation of the results, turn off the power.

Note: If you forget to turn off the power, the unit will be turned off automatically after 5 minutes.

5.Measuring Weight Only

1.Turn on the power.

“CAL” blinks on the display, then the display changes to “0.0 kg”.

*If you step onto the unit before “0.0 kg” appears on the display, an error message “Err” will appear.

2.When the “0.0 kg” is displayed, step onto the unit.

Note: Leave the display unit in the display unit holder.

3.Check the measurement result.

Your weight is displayed and blinks twice to indicate that measurement is completed.

Note: You can also check the measurement result by taking out the display unit.

4.When the measurement is completed, step down from the unit and turn off the power.

10

Image 11
Contents Body Composition Monitor Body Composition Monitor ContentsAvoid taking measurements under the following conditions Useful InformationBody fat has low electric conductivity Recommended measurement timesSubcutaneous fat = fat below the skin Visceral fat = fat surrounding internal organsInserting and Replacing the Batteries Open the battery cover on the back of the main unitBattery Life and Replacement Know Your UnitPress the SET/MODE button to confirm Setting and Storing Personal DataTurn on the power Selecting Measurement UnitDeleting the Personal Data Turn on the Power Delete the personal dataPower Switch Changing the Personal DataSelect the personal profile number Turn on the power Start measurementWhen the 0.0 kg is displayed, take out the display unit Taking a MeasurementPostures to Avoid During Measurement Correct Posture for MeasurementCheck the measurement results Interpreting the Body Fat Percentage ResultMeasuring Weight Only Troubleshooting Error DisplaysCare and Storage How to Take Care of and Store the UnitHow to Clean the Unit BMI Technical DataTechnical Data 14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex, France 24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto JapanKruisweg 577, 2132 NA Hoofddorp, The Netherlands John-Deere-Str a, 68163 Mannheim, Germany