3.Setting and Storing Personal Data
Changing the Personal Data
1.Turn on the power.
“CAL” blinks on the display, then the display changes to “0.0 kg”.
Wait until “0.0 kg” appears on the display.
2.Press the USER button to select your personal profile number.
1)Your number flashes one time on the display.
2)Press the SET/
MODE button to confirm.
Then the selected age setting blinks on the display.
3.With the 
or 
button, modify the selected item, followed by pressing SET/MODE button. The display will change in order of age, gender and height.
Deleting the Personal Data
|
|
|
|
1. Turn on the Power. | 3. Delete the personal data. | ||
“CAL” blinks on the display, then the display changes to “0.0 kg”.
Wait until “0.0 kg” appears on the display.
2.Press the USER button to select your personal profile number.
1)Your number flashes one time on the display.
2)Press the SET/
MODE button to confirm.
Then the selected age setting blinks on the display.
Press the GUEST button for more than two seconds.
“Clr” will appear on the display and the personal data are deleted from memory.
Power Switch
The power will automatically switch off in the following conditions:
1.If the monitor is not used within one minute of “0.0 kg” appearing on the display.
2.If no information is entered for 5 minutes when entering personal data.
3.If the monitor is not used for 5 minutes after the measurement results are displayed.
4.Five (5) minutes after the result is displayed when measuring weight only.
6