1. Know Your Unit
Display Unit
Grip Electrodes
Display
Buttons | Up/Down Buttons |
| SET/MODE Button |
USER Button | GUEST Button |
Cord
Display Unit Holder
Front View
Foot Electrodes
Power Switch
Heel Electrodes
Main Unit (Measurement Platform)
2. Inserting and Replacing the Batteries
1.Open the battery cover on the back of the main unit.
1)Press the tab of the battery cover to release it.
2)Pull it up as shown.
Tab
2.Install the batteries in correct polarity as marked inside the battery compartment.
3.Close the battery cover.
Battery Life and Replacement
When the battery low indicator ( 
) appears, replace all four batteries with new ones.
Items stored in memory are retained even if the batteries are removed.
•Replace the batteries after turning off the power.
•Disposal of used batteries should be carried out in accordance with the national regulations for the disposal of batteries.
•Four AA batteries will last approximately 1 year (when measurements are made four times a day).
•Because the supplied batteries are for trial use only, they may have a shorter life.
4